because cc is a some sort of world standard...maybe ?
rme multiface has totalmix for my knowledge...
I want to program midi controller to have an easy control over rme's totalmix
neither manual (you are wrong sending me there) or internet doesn't have any chart with midi cc commands
all I need is midi channel and cc, or midi note (regarding buttons)
seems fireface800 users got midi with total mix
I got behringer bcn44, especially for this task, as using mouse when controlling totalmix is pita...

thanks in advance

thanks for fast reply,
but my manual seems to lack this info...printed version, on paper,
could be so kind and send me link, so I can implement midi into totalmix, please ?

cheers

it's quite a big site with many documents,
it would really help if you could be more precise....
just tell me what to look for at least...
give me some hints, would you?

almost half an hour and I am making circles ...
is it any way to convince you or any other rme help guy,
to help me ?

I have pc with win xp,
rme multiface 1
with totalmix and digicheck 4.53
drivers show 2.94 version

I need to find midi chart, and control totalmix via midi,
please help

I'm of no help with TM MIDI specifics - but here is the link to all RME manuals:

http://www.rme-audio.de/en_downloads_manuals.php

There is not a chart AFAIK, but the MF-II manual states the following with a quick peek in my very limited free time:

Furthermore TotalMix allows to control all faders of all three rows via simple Control Change
commands.

The format for the Control Change commands is:

Bx yy zz
x = MIDI channel
yy = control number
zz = value

The first row in TotalMix is adressed by MIDI channels 0 up to 3, the middle row by channels 4
up to 7 and the bottom row by channels 8 up to 11.
16 Controller numbers are used: 102 up to 117 (= hex 66 bis 75).
With these 16 Controllers (= faders) and 4 MIDI channels each per row, up to 64 faders can be
controlled per row (as required by the HDSPe MADI).

Should get you going IMO...