Topic: no sound from the ff 400
hi everyone,
i just bought ff 400.
im using win7 32bit with pci-e.
I Update everything and i can open the mixer and everything but i still cant hear no sound.
any soultion?
Check the TotalMix forum!
Pages 1
You are not logged in. Please login or register.
RoomEQ now available for Fireface 802 FS and HDSPe MADI FX!
no sound from the ff 400
RME User Forum → FireWire & USB series → no sound from the ff 400
Posts: 15
- Jeff
- Moderator
- Offline
Re: no sound from the ff 400
Select the FF400 as the output device in your software app and/or Control Panel > Sound menu.
Regards,
Jeff Petersen
Synthax Inc.
Jeff Petersen
Synthax Inc.
Re: no sound from the ff 400
ive tried everything.
http://i47.tinypic.com/sxkt9w.png
Re: no sound from the ff 400
http://i50.tinypic.com/8vt2c1.png
i plug my monitors to an1+an2 but i cant find it in the output on the win7 menu,.
Re: no sound from the ff 400
another pic
- Jeff
- Moderator
- Offline
Re: no sound from the ff 400
house music wrote:
http://i50.tinypic.com/8vt2c1.png
i plug my monitors to an1+an2 but i cant find it in the output on the win7 menu,.
Windows 7 calls the first pair (AN 1+2) Speakers.
Regards,
Jeff Petersen
Synthax Inc.
Jeff Petersen
Synthax Inc.
Re: no sound from the ff 400
Do you mean to "speakers (2-RME FireFace 400)"?
I try it and it doesn't work
Re: no sound from the ff 400
i just found this link http://www.rme-audio.de/forum/viewtopic.php?id=7304
...but the guy who posted the legacy driver link doesnt work.
maybe this is the problem?
- Jeff
- Moderator
- Offline
Re: no sound from the ff 400
No. Try using the external power supply if you currently use bus power, or vice versa.
Regards,
Jeff Petersen
Synthax Inc.
Jeff Petersen
Synthax Inc.
Re: no sound from the ff 400
I need to buy power external supply? What is the vice versa?!
Re: no sound from the ff 400
I spent 8 hours to figure out what is the problem,I spent almost 1800$ on this soundcard and now you are telling me to go buy external supply power?!
- RME Support
- RME Tech Support / Admin.
- Offline
Re: no sound from the ff 400
No need to buy anything. Have a look inside the package, the external PSU is included.
However, since the analog inputs show incoming signal, the unit does seem to be working fine.
I would suspect a configuration issue of sorts, but you can always try the PSU anyhow.
Regards
Daniel Fuchs
RME
Regards
Daniel Fuchs
RME
Daniel Fuchs
RME
- Jeff
- Moderator
- Offline
Re: no sound from the ff 400
I did not realize the unit is brand new.
Reset the Fireface Mixer (hold CTRL and click Preset 1 button), in case the routing scheme is corrupted. Next, please try a quick loopback test, connect analog out of the FF400 to analog in on the FF400. Then check the Fireface Mixer and see if output signal shows up in the top row (inputs). If so, then the problem is not in the FF400, and you'll have to explain more about the monitoring system.
Regards,
Jeff Petersen
Synthax Inc.
Jeff Petersen
Synthax Inc.
Re: no sound from the ff 400
i did everything you mention and it still doesnt work.
there is anyway that my motherboard doesnt fit? or BIOS problem?
my motherboard is http://www.gigabyte.com/products/produc … id=3768#ov
i install the lastest drivers.
- RME Support
- RME Tech Support / Admin.
- Offline
Re: no sound from the ff 400
The pictures in your post #3 show working playback...
When you say "no sound", where is it that you would like to hear sound? What ist connected to which outputs of the FF400?
Please give us more than "doesn't work" and "no sound". We can't see what you are doing.
Regards
Daniel Fuchs
RME
Regards
Daniel Fuchs
RME
Daniel Fuchs
RME
Posts: 15
RME User Forum → FireWire & USB series → no sound from the ff 400
Powered by PunBB, supported by Informer Technologies, Inc.