• Registered: 2013-03-02
  • Posts: 16

Topic: Connecting LYNX Aurora 16 with HDSPe AES=mpossible to find AES cable?

I could not imagine it would be this hard to find a cable to connect the two devices, does any one know where to buy a good quality AES cable that will work with this setup? what brand and model ? They are different format.

[img align=C]http://vintageking.com/media/catalog/product/l/y/lynx_studio_technology_aurora_16_back.jpg[/img]

[img align=c]http://www.rme-audio.de/images/products/products_hdspe_aes_1b.jpg[/img]

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,432

Re: Connecting LYNX Aurora 16 with HDSPe AES=mpossible to find AES cable?

Your RME dealer or distributor will be happy to provide you with ALVA cables.

http://www.alva-audio.de/en_products.ph … ware_tools

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2013-03-02
  • Posts: 16

Re: Connecting LYNX Aurora 16 with HDSPe AES=mpossible to find AES cable?

MC wrote:

Your RME dealer or distributor will be happy to provide you with ALVA cables.

http://www.alva-audio.de/en_products.ph … ware_tools

Thank you. Finally a solution. But the very word "adapter" does give me a feeling of anxiety.
will the sound signal be 100% even with these Adapters ? Hope you understand my concern...considering
how much I put in money on the other side of the chain..Mogami cables etc.

  • vinark
  • DAW Mastermind
  • Offline
  • Registered: 2009-06-05
  • Posts: 2,737

Re: Connecting LYNX Aurora 16 with HDSPe AES=mpossible to find AES cable?

AFAIK adapter with these cables means that the pin out and in is correct. So no change in signal.

Vincent, Amsterdam
https://soundcloud.com/thesecretworld
BFpro fs, 2X HDSP9652 ADI-8AE, 2X HDSP9632
  • Registered: 2013-03-02
  • Posts: 16

Re: Connecting LYNX Aurora 16 with HDSPe AES=mpossible to find AES cable?

vinark wrote:

AFAIK adapter with these cables means that the pin out and in is correct. So no change in signal.

Alright good. to hear...what about Jitter noise and all that ?
Is these adapters likely to create jitter nosie ?

And could some one explain to me which of the two adapter cable I should buy ?
And what other AES cable do I need to buy ?
I did read something about the some AES cable have different OHM ?
well it is important that everything match...

  • Registered: 2013-03-02
  • Posts: 16

Re: Connecting LYNX Aurora 16 with HDSPe AES=mpossible to find AES cable?

I think this one will work WITHOUT any adapter probably better solution and cheaper.

http://shop.klotz-ais.com/cgi-bin/quick … p;nocache=

7 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,432

Re: Connecting LYNX Aurora 16 with HDSPe AES=mpossible to find AES cable?

Immersion wrote:
MC wrote:

Your RME dealer or distributor will be happy to provide you with ALVA cables.

http://www.alva-audio.de/en_products.ph … ware_tools

Thank you. Finally a solution. But the very word "adapter" does give me a feeling of anxiety.
will the sound signal be 100% even with these Adapters ?

Obviously these are just cables with the correct pinout on each side. And as they adapt Tascam to Yamaha units the word 'adapter' is correctly used. A cable RCA to TRS is also called 'adapter cable'...

Regards
Matthias Carstens
RME

MC's Website