1 Topic by gitmani (edited by gitmani 2013-05-11 00:33:39)

  • Registered: 2013-05-11
  • Posts: 2

Topic: problems with upgrade from Hammerfall digi9632 to digi9652

Hi All,

I've been using a Hammerfall digi9632 on a Mac MDD G4 1,42 Dual mac 10.4 with Logic pro 7 for some time now and it works perfectly!
Recently a bought an expansion board for it to turn it in to a digi9652 with 3 adat ins and outs instead of 2

The boards are the same revision (1.5) , there is a green led on the expansion board that is lit and the adat out is also glowing red.
But I can't see the adat 3 in and out and the word clock in and out in the driver.
I've reinstalled the driver several times and also have deleted the preferences file several times.

Am I doing something wrong or might there be something wrong with the expension board?
The digi9636 has an EPROM for the mac on it, should the expansion board have one too?

Thanks for your help!


Kind regards,
Wilco Lindeboom

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,772

Re: problems with upgrade from Hammerfall digi9632 to digi9652

Along with the expansion board, you would need to replace the M36 EPROM on the card with M52...
Unfortunately, these are no longer available, so if the seller of the expansion can not provide it, it might prove difficult.

Regards
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2013-05-11
  • Posts: 2

Re: problems with upgrade from Hammerfall digi9632 to digi9652

Hi Daniel,

Thank you very much for your reply.
I understand and I've contacted the seller and he's going to try to find the missing M52 Eeprom.

Should anyone here have one lying around that isn't being used, please let me know!
Thank you.

Kind Regards,
Wilco Lindeboom