Topic: Windows 8
Quick question: are the old Digi96-cards (have Digi96/8 PAD and Digi96/8) working on Windows 8 32-bit version, please?
Or should I stay with Windows 7?
Uzero
You are not logged in. Please login or register.
RME User Forum → Vintage stuff → Windows 8
Quick question: are the old Digi96-cards (have Digi96/8 PAD and Digi96/8) working on Windows 8 32-bit version, please?
Or should I stay with Windows 7?
Uzero
Nobody able to shine some light on this question, please, be it an RME employee or someone else?
Thanks in advance,
UZ
Honestly - we did not try that. And most probably we will not do it in the future either.
I'm afraid I also don't have a W8/32 system at my disposal. Given that the cards do work with W7/32, though, chances are not too bad....
Regards
Daniel Fuchs
RME
It works! This is my test system: CPU Intel I7-3770, Motherboard Gigabyte Z77X-D3H, 16 gb Corsair Vengeance ram, my old Digi 96 PAD, Win 8 Pro 32 bit
Regards
Schoeps
Good to know, thanks for the testing and feedback.
Regards
Daniel Fuchs
RME
It works! This is my test system: CPU Intel I7-3770, Motherboard Gigabyte Z77X-D3H, 16 gb Corsair Vengeance ram, my old Digi 96 PAD, Win 8 Pro 32 bit
Regards
Schoeps
You do realize you are only getting 4GB or less of your 16GB of installed RAM under a 32-Bit OS, correct? Just pointing that out.
I'm assuming you dual boot to a 64-Bit OS when the RME Card is not needed, but thought I should point this out regardless...
Enjoy!
This is my test system
I have also a RME 9632 for regular use....and Win 7 64bit
Regards,
Silenzioso
Thanks sincerely for your replies, guys!
Regards,
UZero
RME User Forum → Vintage stuff → Windows 8
Powered by PunBB, supported by Informer Technologies, Inc.