I've got two nano controls hooked up. I can only get one to lock to submix 3 and 4 and the other controls all channels. Is that normal or am I doing something wrong?
Just a simple yes or know would be good if anyone has the time. I feel like this might be ataboo question as haven't had any response to this at all.

cheers  Greg

I tried that but if I select submix 1 and 2 both controllers controll the same thing.

Open two windows of TM FX and set them differently. Once set correctly save as workspace.

After cheking this out a little more there are a couple of things that would make it work even better. Having the option of seperate groups for each mix window. Unfortunately if there is a group, window 1's contoller also controls window 2's. The other thing would be to be able to implement a midi CC on the fly to a group and at the same time that would make the usual CC for those faders involved inactive.
Imagine a scenario where during a session I have drums through a specific set of preamps eq's etc comming in on channels 1 to 10 then guitars on 15 -17, voc 12 etc. At the next session a different set of pres is used for drums, perhaps 1 -5 and 14 to 18. I want to give the musician the easiest possible way to control their monitor mix, which assuming I was using a nanokontrol, was fader 1 drums, fader 2 vocal, fader 3 bass etc.
It would be better not to have to give them all 20 channels to mix themselves, so being able to assign a fader group to a cc on the fly for each mix window, would make it super quick and easy to set up the individual controllers without having to edit the actual nanokontrols.
Not sure if there is another way around this?

Is that documented in the manual?

ok sorry about that, i'll be sure to read it in full. I just didn't see a reference to multiple midi controllers.

cheers  Greg

Hi Mathias,

due some overloads of work I never got to fully testing the midi control with more than two controllers. Yesterday I hooked up three korg nano controlls and found that I can't get the 3rd one to be active. I know it's working as if I disconect one of the others and rebbot it works fine. All 3 register as ports in totalmix FX and are showing output/input to port in midiox. Rebooting sometimes changes the order of the controllers so sometimes the one not working is different hardware though it always seems to be number 3 port/atatchd to the 3rd submix that is not working. Using a different usb port makes no difference. Assigning it to the 4th submix makes no difference. I am using the latest version of the madiFX driver for windows
The same problem is happening on the mac though I think it was only one port working.

best regards Greg