• mahe
  • New member
  • Offline
  • Registered: 2024-06-16
  • Posts: 5

Topic: Fireface ucx ii rca/Cinch input question

hi

im trying to route stereo signal from a radio with two cinch outputs into the fireface.

is using adapters to convert the cinch to 6.3 jacks and plugging them into the line ins at the front or back the only option

OR

could i also plug them into the cinch adapters on the breakout cable?

the second option hasn’t worked for me yet but maybe because i didn’t set up totalmix correctly.

thanks!

2 Reply by waedi (edited by waedi 2024-08-08 10:57:35)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,541

Re: Fireface ucx ii rca/Cinch input question

mahe wrote:

hi

im trying to route stereo signal from a radio with two cinch outputs into the fireface.

is using adapters to convert the cinch to 6.3 jacks and plugging them into the line ins at the front or back the only option

Yes you have to use an adapter cinch to TS



mahe wrote:

could i also plug them into the cinch adapters on the breakout cable?

No, those are digital inputs AES or SPDIF, not for analog signal.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • mahe
  • New member
  • Offline
  • Registered: 2024-06-16
  • Posts: 5

Re: Fireface ucx ii rca/Cinch input question

great, many thanks for clearing that up!

4 Reply by ramses (edited by ramses 2024-08-08 11:41:19)

  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,194

Re: Fireface ucx ii rca/Cinch input question

mahe wrote:

could i also plug them into the cinch adapters on the breakout cable?

great, many thanks for clearing that up!

That was really no rocket science ...

Wondering whats unclear, you only need to read whats printed on the back

https://www.dropbox.com/scl/fi/5qh4fu9slxcbzl3ak7oq7/2024-08-08-1Fireface-UCX-II.jpg?rlkey=yirarlw561pcesp9chdsay8ld&dl=1

... or written in the manual p 10

The rear panel of the Fireface UCX II features 4 analog inputs and 6 analog outputs, the power socket, USB, DURec (USB-A), word clock, MIDI I/O, ADAT I/O, and a connector for the included breakout cable D-sub to XLR/RCA (SPDIF/AES I/O).

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Kubrak
  • DAW Mastermind
  • Offline
  • Registered: 2023-08-03
  • Posts: 549

Re: Fireface ucx ii rca/Cinch input question

You are right... But most people do not know what XLR, AES means.... And few even RCA or SPDIF. And they are not aware of digital/analog aspects of different connectors.

IMHO, it is not "wise" to use XLR/RCA sockets for the both analog and digital signals as it might bring sort of confusion. But things are as they are....

  • From: Valencia, Spain
  • Registered: 2024-04-18
  • Posts: 62

Re: Fireface ucx ii rca/Cinch input question

Hello

Good experience with Palmer LI-05 ...

https://www.palmer-germany.com/en/produ … -05?c=2123

... if you want to convert to TRS and avoid possible hum noise.

UCX II FW106/34/104 v1.253 TM1.97 - PC Win11 23H2 / Fedora WS 41 - Reaper 7.27