• Registered: 2010-10-31
  • Posts: 2

Topic: Fireface 400 problems with YAMAHA HS80M monitors

Hello,

another problem with FF400...

After conecting HS80M via A 1-2... I got the problem with monitors.
In every musical programm or even winamp sound goes from the LEFT much louder and EQued than from the RIGHT.
I have tried changing cables and switching monitors... but still is the same problem... LEFT louder and RIGHT one is like 2-3DB in diffrence.

what this could be?? checked out RME mixing pult and both signals are equal... sad

  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,619

Re: Fireface 400 problems with YAMAHA HS80M monitors

Hi,

First try a reset of the FF Mixer - hold CTRL and click preset 1.

If this does not solve it, please check if the problem is really in the FF400. Connect analog cables in loop back configuration - Analog out 1 > Analog in 5, Analog out 2 > Analog in 6 - then check the mixer top row to see if you can notice a difference. Should be easiest to see a difference with a test tone.

If you see there is really a hardware problem at the jack, then the unit will require service.

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website