You are not logged in. Please login or register.
RME User Forum → Linux → Babyface/d:fine, no sound
My OS is Linux Mint 16
I have recently purchased the Babyface and a DPA d:fine microphone.
Microphone is attached to the breakout XLR 3-prong via an adapter.
I start the Babyface in class-compliant mode (holding the 2 buttons while plugging in USB power) and my system recognizes the sound card. . .but there is no input sound from the microphone.
Any help would be appreciated
Kind Regards,
-MycoMage
Is there something burningly obvious that I'm missing? I am not well-versed in recording tech yet
I called tech support for DPA, the gentleman there said it was most likely because the soundcard (Babyface) was not giving any power to the d:fine
As I am connected mic->adapter (http://www.avlgear.com/dad6001-dpa-dad6 … r-adapter/) ->breakout-cable -> Babyface -> laptop, what would be the method to give >= 5V to the microphone?
Called tech support for CCI Solutions. . .a pleasant gentleman by the name of Shane explained some things to me re: 48V phantom power.
There is no orange light at the bottom of the display indicating 48v is on, and the TotalMix FX program is not available on linux
QUESTION: Will buying the optional power supply provide the 48V phantom power, since I do not have a way to access TotalMix FX, or is there another way to toggle the 48V on/off?
From the manual:
48V Phantom power on/off
Use Select key and select “In”
Push the Encoder to select the desired channel (left, right, both)
Push and hold the encoder until the orange 48V LED(s) turn on/off.
Regards
Daniel Fuchs
RME
A thousand thanks, issue is resolved
RME User Forum → Linux → Babyface/d:fine, no sound
Powered by PunBB, supported by Informer Technologies, Inc.