1 Topic by MathKiller (edited by MathKiller 2017-01-11 08:59:00)

  • Registered: 2015-06-30
  • Posts: 24

Topic: A problem with USB-Midi control of XTC with last release drivers

Hello! There is a problem with USB-Midi control of XTC with last release drivers (driver_usb_win_1097.zip and driver_madiface_win_09590.zip)
Sound card is RME Fireface UFX.
When i adjust channel gain by knob at XTC front panel - it some time does not synchronise with totalmix (every some seconds), and totalmix returns gain at XTC to previous value.
This problem is with Totalmix v 1.35 and 1.4 rc1
There are no problems with totalmix 1.31 and driver driver_usb_win_1093 and driver_madiface_win_09573.

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 24,877

Re: A problem with USB-Midi control of XTC with last release drivers

Current driver is 1.098 with TM FX 1.40 inside.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

There is same problem with 1.098. I can make a video with a problem.

4 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 24,877

Re: A problem with USB-Midi control of XTC with last release drivers

Are you sure your TM FX says '1.40' in the about dialog? How is MIDI connected between UFX and XTC?

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

Yes, it is 1.40 in the about dialog. I Connect XTC by USB to PC, and UFX is also connected to USB, it is USB-midi control

6 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 24,877

Re: A problem with USB-Midi control of XTC with last release drivers

Let us check that.

Regards
Matthias Carstens
RME

MC's Website

7 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 24,877

Re: A problem with USB-Midi control of XTC with last release drivers

We checked and can not reproduce any problem. Maybe a video will indeed help if it shows all the details of the configuration and settings.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

Uploaded a video to youtube
https://youtu.be/JKzEAwUxRQQ

9 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 24,877

Re: A problem with USB-Midi control of XTC with last release drivers

Well, that video is of no help.

What are the exact settings on the computer (Settings dialog)? What are the exact settings in the XTC (menus)?

Also you might have an audio problem that you didn't notice so far - plugging one of both units into a different USB port (driven from a different USB bus) might also change the remote behavior.

How many more devices are plugged into USB? Anything suspicious, like WiFi, Bluetooth, another remote?

Can you change to normal MIDI cabling to check that at least that one works?

Regards
Matthias Carstens
RME

MC's Website

10 Reply by MathKiller (edited by MathKiller 2017-01-13 06:00:42)

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

I just tried to change connection to all other usb-ports, not have a effect.
I just tried to disconnect all other usb hardware, not have a effect.
I don't have midi-cables at this time, always used USB-control more than 2 years with all previous driver versions, and all worked excellent.
https://pp.vk.me/c637721/v637721915/2df1b/bfQfyZjjjaw.jpg
https://pp.vk.me/c637721/v637721915/2df09/J7oXaMHz_nc.jpg
https://pp.vk.me/c637721/v637721915/2df13/WydaO0Ir2v8.jpg

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

Just recorded a new video with previous drivers
https://youtu.be/fZ2bMz_j7So

12 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 24,877

Re: A problem with USB-Midi control of XTC with last release drivers

That looks good. Please post the Settings dialog of the UFX and XTC (both driver tabs) too. And from the first pic: Tab MIDI please.

Also: is MIDI Control enabled in Options of TM FX? It's not necessary if you only use the Aux Device control.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

https://pp.vk.me/c637721/v637721915/2e0d6/GN0QnyqXXas.jpg
Midi control in options is not enabled.
I use only control of 1 XTC, dont have any other controllers, if you mean that.

14 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 24,877

Re: A problem with USB-Midi control of XTC with last release drivers

Thanks. Discussion ongoing.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

Any news?

16 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 24,877

Re: A problem with USB-Midi control of XTC with last release drivers

Unfortunately not. You could try the latest beta of TM FX, though, available here:

https://www.forum.rme-audio.de/viewtopic.php?id=25205

Regards
Matthias Carstens
RME

MC's Website

17 Reply by MathKiller (edited by MathKiller 2017-03-28 16:12:07)

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

MC wrote:

Unfortunately not. You could try the latest beta of TM FX, though, available here:

https://www.forum.rme-audio.de/viewtopic.php?id=25205

Just tried to use latest beta. There is same problem in it. It is not solved.
Only I have this problem?

  • Registered: 2015-06-30
  • Posts: 24

Re: A problem with USB-Midi control of XTC with last release drivers

I don't know, what happened, but all became work good, when i just bought second XTC)