Re: UFX / UC + USB C / Macbook Pro 2016
We have a firmware update which should solve the USB 2 detection/recognition problems of Babyface, Fireface UC, UCX, UFX, UFX II and 802 with the latest Apple MacBooks. Please download here and try:
.../download/fut_usb_mac_142.zip
or
.../download/fut_ma … ac_142.zip
Note: this update ONLY addresses the problem that the interface is not recognized when the USB-C adapter is plugged into the MacBook while the interface is already connected to said adapter. It might also solve recognition issues after sleep, as they might have the same root cause, or when powering up with the adapter already plugged in.
Hi,
Here with macbook pro 2017 15" 2.9ghz radeom 560 + babyface(not the pro) with latest drivers(v3.03) firmware(v225) + Sierra 10.12.6 + CharJenPro USB-C 3.1 HUB/ADAPTER: https://www.amazon.com/gp/product/B01MX … &psc=1
Still having issues when desconecting the usb 3.1 hub with babyface plugged. Same effect as reported earlier(Have to turn reboot by press touch button, touchbar doesn't work).
In order to make the HUB/babyface work I have to follow some steps.
- Hub has to be connected to power to mac power cable.
- Then i have to connect the hub(without the babyface) to computer first.
- Plug the babyface and it is recognized.
If I disconnect the babyface from the hub first and then the hub, the issue doesn't happen. But if the babyface is connected to the hub and I disconect the hub, the issue happens(touchbar stops working, etc).
Hope there is a fix soon either from apple or RME if required.
Will the same issue happen if I buy a cable usb 2.0 to 3.1?
Considering if the hub is making my workflow a lot harder than pluggin directly to macbook pro.
Thanks!
best,
PJ