You are not logged in. Please login or register.
RME User Forum → TotalMix FX → UDP problem with TotalMix remote
Hi,
i am running on the mac macOs Sierra.
all setup, anyway error: No UDP data received at all. Please check firewall setting on host.
I do not have any firewall on mac.
Could you please navigate me, how to solve on mac and where?
What is the other device? What are your network settings in these two devices?
ipad
and my network setting on both devices
https://www.dropbox.com/s/r4nlppwwabzq5 … 5.jpg?dl=0
Pic 3 (29) makes no sense - you can not use the Remote app on the host. The iPad is configured correctly, it seems (as it finds your 802), but a screenshot from the TotalMix FX Remote Settings is missing.
what setting from totalMix FX do you require?
Options - Network Remote Settings.
solved, after uninstal remote from mac and setup totalFX network setting according to ipad.
thanks for great support
I too got the "No UDP data" warning, but my Fireface UCX still connected. HOWEVER, it cycled through "connected" and "offline" every 5 seconds (upper right indicator on iPad's TM Remote). Thus, of course, the two interfaces only came into sync every 5 seconds. FYI my systems: MacBook Pro 15-inch 2017 touchbar, MacOS High Sierra; iPad mini v4, iOS 12.1—TM Remote 1.14, TM FX 1.50.
Obviously on the same WiFi network, but, in checking, I discovered that I had two network interfaces active (Ethernet AND WiFi, albeit different IPs). When I unplugged the ethernet cable my TM Remote became rock solid.
Hopefully this will help someone else troubleshoot a similar situation.
the same for me!
Not sure whether this is an old article, but it appears to me that you should set service order to Ethernet over WiFi.
https://discussions.apple.com/docs/DOC-11171
It makes no sense to use Wifi if Ethernet is also connected, then of course use Ethernet.
Was this issue ever solved? Because I am having he exact same problem with my Mac running Ventura and Totalmix Remote on my iPad.
I too got the "No UDP data" warning, but my Fireface UCX still connected. HOWEVER, it cycled through "connected" and "offline" every 5 seconds (upper right indicator on iPad's TM Remote). Thus, of course, the two interfaces only came into sync every 5 seconds. FYI my systems: MacBook Pro 15-inch 2017 touchbar, MacOS High Sierra; iPad mini v4, iOS 12.1—TM Remote 1.14, TM FX 1.50.
Obviously on the same WiFi network, but, in checking, I discovered that I had two network interfaces active (Ethernet AND WiFi, albeit different IPs). When I unplugged the ethernet cable my TM Remote became rock solid.
Hopefully this will help someone else troubleshoot a similar situation.
Not sure whether this is an old article, but it appears to me that you should set service order to Ethernet over WiFi.
https://discussions.apple.com/docs/DOC-11171It makes no sense to use Wifi if Ethernet is also connected, then of course use Ethernet.
I was having the issue on Mac OS Sonoma, I first turned off the ethernet that worked, but then I turned it on and did the reordering and that also worked, ethernet is ordered first and wifi second for me and still working, thanks!
RME User Forum → TotalMix FX → UDP problem with TotalMix remote
Powered by PunBB, supported by Informer Technologies, Inc.
