• Registered: 2009-09-10
  • Posts: 14

Topic: FireFace 800 Bluetooth

Hello to community,


I want to ask the following, I have Edifier Luna e235 speakers which connections are with 3 ways. 1st is Bluetooth 2nd is with optical in and 3rd is with stereo jack. If I want to connect with the optical where should I input the cable in ff800 on ADAT1? I tried it but got no sound out. Also when I connect with the stereo jack I got a mono sound probably cause I need to split in to 2 ff800 out puts (confused) Lasst but not least is there a possibility to transmit sound from ff800 with Bluetooth (with some kind of an adapter connected to one of the ff800 outputs)?
I would appreceiate if you can guide me also on matrix layout

Thank you in advance

  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,650

Re: FireFace 800 Bluetooth

The speaker's optical input will not be compatible to ADAT format. You can set the FF800 to send Optical S/PDIF format from the ADAT2 out port, this option is found in the Fireface Settings app. Then route the audio to SPDIF Out in your FF800.

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website