Will there also be an updated remote app for iOS?

It's been more than a week since you replied and still there's no update for iOS. Why the delay?

I check the new 1.62 version with my UFXII and my ARC USB controller what does the new option "Push-off or on" make the difference?

Correct me if I'm wrong:

I like to see if you "push" or hit the Talkback button on ARC USB controller in one short time the Talkback button should be activated in a permanent way until you push it again with one hit. And on the other way if you hold the button for the speaking sequence time and leave it after speaking off, than it should be come back in non activated status like on traditional big "old-school" consoles do happen.

For sure I'm not the first people like to see this functionality for the ARC USB controller.

Another story:

TotalMix Remotes app for mobile Android systems? Should be time for this!

Thank you very much with best regards

Trommeltotti

MC wrote:

Alright, I understand. This is probably a upcoming feature in next TotalMix FX version. Maybe also a additional  functionally to configure two! Talkback microphones (instead of one Talkback and one Listenback) for situations in one room with headphones using for everybody. (Performer and Engineer)

Thank you very much

Where to find the latest version TotalMix FX for windows? Looked for it in downloads (USB\Software\Others). Saw only TotalMix Remote.
Thanks.

I have a newer MAC running Mojave with Total Mix and a Digiface Dante RME device. why do I not see the EQ or Dynamics tabs in Total Mix. They are not there at all.

I am using the this version of Totalmix FX in Win10 and Remotes also in the same Win10, but I am not able to connect between Remote and FX even though they are in the same PC.
I read through some threads, knowing I have to make it pass through my firewall, shut down anti-virus, shut down fire wall on the router. After I did all these, still cannot connect.

I am using Fireface 802 with USB connected.

Any ideas?

Alvis Chan

That would be an effective way to double the number of remote controllers available via midi/osc, as the mac / win version of TMFX remote is remote controllable too.

MC's comment here: https://forum.rme-audio.de/viewtopic.ph … 38#p143238
led me to believe that it's possible. And indeed my TMFX remote seems to have separate midi controller settings from the host TMFX. However, only midi controllers are available on TMFX remote, so no OSC here.

Still waiting for the global osc control anyway.

Thanks for your reply. I was testing it with lazy. Now I dig out my iPad.
I found the problem is caused by my network switch that it blinds the Totalmix FX for the ip, i.e. it telling the wrong ip of my PC. Now I manually checked the ip address for my PC and it works fine.

Thanks.

Hi All,

Owner of Babyface Pro.  WIN10 1803.  Update to latest Firmware 125 went OK.  All working fine.

But I'm confused as to the latest version of Total Mix.

When I open Total Mix FX/Help/About it shows version "1.61."

When I open Fireface USB Settings it shows:
"Driver Date 27.06.19"
"Driver Version 1.168"
"Hardware Revision 125"

Is this the latest and greatest set of WINDOWS USB Drivers/Total MX FX?

I have on my hard drive a file named "tmfx_win_163.zip" which I downloaded Sep. 17, 2019.  When I run it nothing happens.

What is the latest version of Total Mix for Windows?

Thanks,
Danny V.

danevaz
Thanks for question.
ramses
Thanks for reply.
Didn't understand why TM FX v1.61. When TotalMix FX 1.63 available 2019-09-15 and not Beta.

I understood finally!!!

I've downloaded every driver I can find on the web site. Not one of those drivers includes TotalMix FX or TotalMix Remote. Out of all the links you've posted in the forum, not one of them includes TotalMix FX. I was able to download TotalMix Remote for Mac, but when I try to open it, it will not open. All I'm trying to do is use my brand new Fireface UFX+ as a USB audio interface (something that it should be configured to do out of the box), and here I am deep in the jungles of the user forum looking for ancient download links that RME has by some miracle forgotten to take down.

First off, in terms of the RME user experience, I'll just say this: YIKES

Secondly, a question: where can I download TotalMix FX for Mac?

Your brand new UFX+ comes with a printed user manual. It includes a detailed chapter about driver installation on Mac. And also explains that TotalMix is part of that driver installation.

Please re-read post #29: "[...] And also explains that TotalMix is part of that driver installation."
This should answer your question.

The manual section has surely been written at a time, where it was standard to deliver CDs.
BUT .. these times are long over as the usefulness of driver CDs is very questionable,
because these drivers are quicker outdated than you can buy the product...

But its still a valid statement, that TM FX is included in the driver package and is being installed along with the RME driver.
And if RME / MC tells you so (post #29) then you can trust it...

All RME manuals, drivers and software are available from Webserver. Unfortunately there seems to be a webserver problem (the 1st one that I notice in around 6y ..) so please wait for the next business day when hopefully everything has been resolved.

I bookmarked the URL of the RME archive site which contains the drivers of approx 6+ months ago.
Maybe it helps you to get the stuff working at least.
But as soon as the webserver is online I would check there for the latest drivers.
https://archiv.rme-audio.de/downloads/driver/uc.php

Good luck.

Is the Settings dialog opening?