Jeff wrote:Please reset your TotalMix FX app (Options > Reset Mix > Total Reset).
You might be getting into trouble by using the "loopback" function in TotalMix. If you still have trouble, there must be something else going on that we are not aware of yet.
Hi Jeff, thanks for taking the time to help out.
I did a total reset of the app, and also made sure loopback wasn't enable on any channel.
I played back a drum loop in Ableton then recorded input 1 and 2 without any cables plugged into any input on the Babyface.
Software playback is set to odb, and main out is set to -10db.
There is still a bleed from the output in both recorded channels, at around -60db.
As an aside I've had the Babyface for around 10 years, and 5 years ago it had a logic board replacement, not sure if that could be a cause?