Topic: UFX USB & Firewire Issues
I have two separate issues with my UFX, in order:
1. USB - I had a powercut this week, since that powercut the UFX will no longer connect to my Dell XPS via USB. I've tried different USB ports on the Dell (which I know to work as I connect other peripherals to it), and I've tried different USB cables (which I know to work as I use them to connect other peripherals). So, I'm guessing the USB port has had it; I'm in the UK, so, does the UFX need a trip back to Germany, can it be fixed, how long does it take and what's the rough cost. In addition to this, are there any tests I can perform on the unit to pinpoint that this is the issue?
2. Firewire - pursuant to the USB issue, I connected the UFX to my Dell XPS via Firewire and that works fine. I use an FW400 to FW800 cable, an Apple FW to Thunderbolt 2 adapter, an Apple Thunderbolt 2 to Thunderbolt 3 adapter into the Thunderbolt 3 port of my Dell. This works fine, no issues. However, if I connect the UFX, via this cable setup, to the Thunderbolt 3 port on my Dell TB16, which in turn is connected to the XPS via Thunderbolt 3, the Dell can't "see" the UFX and therefore won't connect. Could be an issue with the TB16, but I thought I'd ask if there's something I need to do on the UFX to connect via this fashion. I'd rather go via the TB16 as that's powering the XPS, as well as controlling various other devices connected to it.
Thanks in advance!
Edit - I should add, I'm not averse to getting an OCW Thunderbolt 14 or Caldigit TS3 to replace the TB16, if the TB16 is the issue with not wanting to connect to FW, but I wanted to make sure that the UFX can connect to a Thunderbolt dock, then to the XPS before I go down this route.