Topic: Output lost in babyface proFS. Comes back after a change in buffers
I have been using a new pc lately, ryzen 3600xt, 16gb, M2 500gb with my existing RME babyface proFS, on win 10 and cubase 10.5 pro.
When trying to work on previously created (and even edited just the day before) projects which were created on a Dell laptop with the same card, sometimes after the project is loaded I get no output at all.
I.e. there is no output in Cubase and of course in the RME.
Audio connections are OK and audio card selected OK. Sometimes the project may have been saved just the day before and it was playing OK.
The way to make it trigger the output is only by changing the buffers, i.e. from 256 to 128 or vice versa. If changed from 256 to 128 for example I may work for as long as I want on this setting. The next day if I open the same project again chances are 50/50 it will play OK or be silent until I change again from 128 to 256.
Resetting the RME in cubase does not solve the problem either. Also this never happened with the Babyface for the six months I used it on the Dell Laptop.
There has to be a change (any) in buffers, to get sound again if sound is lost.
Is there an explanation?
Ryzen5 3600XT, Nvidia 1650, Win 10, Cubase 11 pro, BBF ProFS, Rode NT1a, CC121, ADA8200