1 Topic by squeakyfrom (edited by squeakyfrom 2021-04-15 16:46:07)

  • Registered: 2021-04-15
  • Posts: 4

Topic: [Solved] Fader not moving with baby face

hi there,

i'm using total mix fx 1.60 mac
with a babyface with latest firmware and driver.
OSX 10.9.5

everything was working fine, until today.
Now when i move the big jog dial on the babyface,  the volume gets adjusted as expected,
but the fader in TM is not moving up or down.

not sure why this changed i checked settings and preferences and everything seems to be the way it should be

any help is appreciated!

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,546

Re: [Solved] Fader not moving with baby face

Try a total reset in Totalmix ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue

3 Reply by squeakyfrom (edited by squeakyfrom 2021-04-15 16:36:33)

  • Registered: 2021-04-15
  • Posts: 4

Re: [Solved] Fader not moving with baby face

yeah also tried that but it didn't resolve the issue
(and of course a restart of the whole OS)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,546

Re: [Solved] Fader not moving with baby face

My Totalmix FX is 1.73.
May be an update of the driver is ready ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2021-04-15
  • Posts: 4

Re: [Solved] Fader not moving with baby face

ah i forgot to mention I'm still on OSX 10.9.5

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,546

Re: [Solved] Fader not moving with baby face

Have you connected any Midi device, a midi keyboard ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,665

Re: [Solved] Fader not moving with baby face

Now when i move the big jog dial on the babyface,  the volume gets adjusted as expected,
but the fader in TM is not moving up or down.

I think you may be confused about the hardware controls. The jog wheel can control input gain for analog inputs, or output level. Please check again. Press the OUT key on the hardware until Ch 1/2 LED is lit. Now the knob controls the fader for AN 1/2 outputs. Turn the knob. Check that the output fader in Totalmix FX bottom row is moving as expected.

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website

  • Registered: 2021-04-15
  • Posts: 4

Re: [Solved] Fader not moving with baby face

Problem solved. thanks for the help guys.
it was, of course, my own stupidity in the end
smile