You are not logged in. Please login or register.
RME User Forum → MADI/AES Premium Line → PCI MADI Driver 64 bit - Bug report : MIDI Output mismatch
Hello,
I am running Windows XP 64 bit and use the latest 3.07.1 driver dated 08/09/2008 for my MADI PCI card. Runs just fine, except that MADI Midi Port 2 is Physically connected to Midi Port 1! Could that be taken care of in a forthcoming release?
Best,
Thomas
You mean your MIDI breakout cable is not labelled correctly?
Nope. It is correctly labelled as I 'just' changed the OS on the same PC without touching the cables. Of course I did double-check before posting here.
Best,
Thomas
To be very precise, I used to send MTC on MADI Midi Port 1 (Host is Sequoia - Receiving end is a DM2000). After upgrading the OS & loading the 64 bit driver, I now need to route MTC through MADI Midi Port 2 (software), however Port 1 (physical) is still connected to the DM2000 (I did not change the cables of course).
At the time of writing, I need to finish a project so I did not make extensive testing, sorry. All I can say is that the Midi Port 2 stream is sent to Port 1 cable. Can you reproduce this?
Best,
Thomas
After further investigation, it appears Sequoia .ini files were corrupted. We are back to normal. Apologizes for the inconvenience & thanks again for a swift response/interest
Best,
Thomas
RME User Forum → MADI/AES Premium Line → PCI MADI Driver 64 bit - Bug report : MIDI Output mismatch
Powered by PunBB, supported by Informer Technologies, Inc.