• Registered: 2014-07-17
  • Posts: 108

Topic: USB Diagnosis

Does anyone know what the USB Diagnosis Codes mean?

USB Diagnosis 1 | 2 | 0    ...etc

Windows 11 / Nuendo 12 / UFX+ / M-1610 Pro / ADI-2 Pro FS R / Sonnet USB 3.0 PCIe
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,173

Re: USB Diagnosis

USB transport errors, MC told in a posting that any number != 0 is bad.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2014-07-17
  • Posts: 108

Re: USB Diagnosis

Thank you Ramses.

Going out of my mind here. Trying to get this UFX+ installed and working properly before tomorrow. Tried Thunderbolt. No go.

I'm sure the Sonnet card will sort out the USB, but it's a few days away. Can't understand why TB 3 to 2 isn't working

Windows 11 / Nuendo 12 / UFX+ / M-1610 Pro / ADI-2 Pro FS R / Sonnet USB 3.0 PCIe

4 Reply by ramses (edited by ramses 2022-01-31 13:01:15)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,173

Re: USB Diagnosis

CRC errors could indicate issues with the cable.
I would try another one, 3m is maximum length for USB3.
I am using 3-times shielded USB3 premium cables from Lindy for ~€22, which are good.

Try all USB3 ports, maybe some ports (from either chipset or 3rd party USB chip) are better than the other.

If CRC errors do not go away, try an USB2 port for the time being  (then without MADI) until the Sonnet arrives.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2014-07-17
  • Posts: 108

Re: USB Diagnosis

Thank you Ramses!

I'll give the USB2 a try. I'll report back.

Windows 11 / Nuendo 12 / UFX+ / M-1610 Pro / ADI-2 Pro FS R / Sonnet USB 3.0 PCIe
  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,173

Re: USB Diagnosis

Pls check on the UFX+
Push "Setup" knob, then -> Options -> Interface Mode -> Is this set to the default "Auto" ?

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2014-07-17
  • Posts: 108

Re: USB Diagnosis

Found it... Yes, it is.

Windows 11 / Nuendo 12 / UFX+ / M-1610 Pro / ADI-2 Pro FS R / Sonnet USB 3.0 PCIe