• Registered: 2016-08-08
  • Posts: 4

Topic: MADIface PRO FX send not working

I've had the MADIface for quite some time, but have never had to use the FX before. I'm using it with a windows 10 laptop with the PSU provided by RME.

I have a mic going into AN1 set to mono. Signal present. I wanted to add some fx for phones cue.

I have the channel routed to ph3/4 for monitoring. No problem. I hear the mic source perfectly. 

I turned the FX fader send all the way up on AN1.

I make sure the FX are on.  I check the FX meters. No movement on the FX meters. So, this appears that the send on AN1 is not getting to the FX input. I should be seeing some meter action, correct?

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: MADIface PRO FX send not working

Please download this version of TM FX:

https://www.rme-audio.de/downloads/tmfx_win_176.zip

Exit TM FX and overwrite TotalMixFX.exe in Windows\System32 with this file, then start it. This is a release version that unfortunately is not yet available in a driver package.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2021-12-30
  • Posts: 151

Re: MADIface PRO FX send not working

godlesshorror wrote:

I turned the FX fader send all the way up on AN1.

After you install that version of TotalMIX FX that Matthias showed you, make sure you turn up the return on whichever output you're listening to (phones, main, etc.)

-Steve