Topic: [Solved] Digiface Dante Distortion on Audio Input Channels
I recently purchased a Digiface Dante and am having some issues.
Playback of audio works fine over Dante Network....to include recorded audio and virtual instrument playback within a DAW (have tested in Logic Pro, Ableton Live, and Reason).
However, using any Dante input results in distortion of input signal. Have tried multiple devices (REDNET 4, REDNET X2P) and am always getting a distorted signal no matter which channel I assign inputs.
Have tried switching different ports on the Digiface, but the distortion remains. Have tried all buffers and sample rates without change to distorted signal.
The exact same network works perfectly on my PC using a REDNET PCIe card as the Dante interface with no distortion of any channels on input.
I have tried re-installing both the USB driver and the network simulation driver for the Digiface. I have checked within Dante Controller an all subscriptions show green without any errors. All devices show proper clocking and sync.
The distortion is present when I monitor incoming audio on any device (including the DF Dante itself).
System is a Mac Pro 14 (M1)
OS is 12.3.1 (Monterey)
DF Dante is on latest Firmware
Network switch is a Cisco SG350 10P configured exclusively for Dante
Dante Controller for macOS v22.214.171.124
Any tips or things to try would be most appreciated!