• Registered: 2021-11-25
  • Posts: 13

Topic: Connect 2 active speaker to the 2 headphone outputs of Adi-2 pro fs

Hello

Is it possible to connect 2 active speakers(or 2 power amps) to the 2 headphone outputs (so one mono speaker or amp per headphone output) of the ADI-2 PRO FS?

Sincerely

2 Reply by KaiS (edited by KaiS 2022-08-24 13:43:58)

  • KaiS
  • DAW Mastermind
  • Offline
  • From: Germany
  • Registered: 2020-02-05
  • Posts: 3,141

Re: Connect 2 active speaker to the 2 headphone outputs of Adi-2 pro fs

Yes.
For coupling of both output’s controls, switch ADI-2 Pro to to Balanced Phones Mode (manual page 44) if the speakers are a stereo pair.

Depending on the speakers/amps you can use balanced or single ended interconnects.
Just need the fitting cables.
Either way, you have to use 6.3 mm TRS jacks at ADI-2 Pro’s side, NEVER 6.3 mm TS!


Practically, the result should be not much different if you just use PH 3/4 OR PH 1/2 in normal stereo, with a splitter cable 6.3 mm TRS to you speaker connections.


What exactly are you heading for?

KaiS's Website