Topic: 12mic not passing signal out via MADI
For some time I have been using this MADI optical configuration:
UFX+ out => 12mic in
12mic out => XTC in
XTC out => UFX+ in
Today I discovered that nothing is coming into the UFX+ from the 12mic.
I can connect a mic to the 12mic front panel, and I see the signal on the front panel. I can also see it on the browser remote and on the Remote AVB app.
However, there is no signal getting through to TotalMix, and nothing coming through when I set any 12mic output as the input to my DAW.
Also, the MADI light on the UFX+ has started blinking. When I look at Input on the 12mic front panel, it is also blinking. In the driver settings app, the connection blinks between sync and lock.
Finally, the graphic lines in the browser remote that show the routing between the 12mic inputs and outputs are all gone! I manually set MADI optical input 1 to optical output 1 (up to 9 and 9) on the 12mic front and saved that as a preset. The browser remote then showed the lines, but still no sound.
I don't have a clue how to proceed from here. Any help would be much appreciated.