• Registered: 2021-02-14
  • Posts: 14

Topic: Babyface Pro and 12Mic

Hi,

I typically use my 12Mic connected up to my UFX+ via MADI. I can get all 12 mic channel signals to appear in TotalMix over the first 12 MADI channels. All is good. Is it possible to use the 12Mic with a Babyface Pro and have all 12Mic channel signals in TotalMix? I know that ADAT will only handle 8 of the channels at 48K, but I wasn't sure if there was a way of routing the remaining 4 mic channels.

Thanks,
Chris

2 Reply by ramses (edited by ramses 2022-09-09 06:19:44)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,214

Re: Babyface Pro and 12Mic

Two more mic channels of 12Mic through its headphones output, unbalanced to BBF Pro.
Either through line inputs AN 1+2, but you could also try the universal line inputs AN3+4.
Then you could have up to 12 Mic inputs
— 8 from 12Mic through ADAT
— 2 from 12Mic through Analog 3+4 IN (check whether it works)
— 2 from BBF Pro.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • Registered: 2021-02-14
  • Posts: 14

Re: Babyface Pro and 12Mic

Thanks very much Ramses. I’ll give it a try.