Topic: RME Fireface UCX II or Total Mix issue
I’m a singer songwriter guitarist. I’m not doing anything difficult that I can tell.
This has all been working well until the weekend and I switch my Macbook Pro on and now I have the issue below. Its driving me mad.
RME Fireface UCX ii is upto date with firmware and software. I’m running Apple 11.7 OS
I bought a new electric guitar and plugged it into the front port 3 on the RME Fireface UCX ii. I went to Hardware outputs AN3/4 and turned it into a mono port, but have set this as stereo as well. Doesn’t make a difference
Went to Software play back and raised the volume of AN 3 and went to hardware in puts and raised the volume on AN3. The meter on Hardware Input is showing a feed from the guitar, and Hardware output is showing a feed coming from the guitar in Total mix. But I am not seeing anything in software playback. Its dead.
When I’m in Logic X I have set the audio channel to Input 3 and can see the meter move there as well. But when I bring up my Positive Grid BIAS AMP, or Positive FX plug in or any guitar plugin (including TUNER) its all dead. Its like they are not receiving a feed.
Main is set to None
And Phone 1 is set to Phones.
Electric Guitar into RME Fireface UCX ii port 3
Total FX Hardware Output AN3 set as mono. Volume up
Total FX Software Playback Volume up (nothing appearing on the meter)
Total FX Hardware Input AM3 set as mono volume up.
Any help would be very much appreciated,. Not sure where I am going wrong with this set up now