You are not logged in. Please login or register.
RME User Forum → DIGICheck → What Analyser settings for same response as ADI hardware?
Quick question:
What Windows Digicheck Spectral Analyser settings do I need to use to have exactly the same response as the version that shows on my ADI-2/4 Pro SE's screen?
Hi Babaluma.
You've probably figured it out yourself by now, if not, here's my answer:
DIGIcheck Spectral Analyzer (A) or better Totalyser (T) which also includes Vector Audio Scope and Correlation Meter.
Thanks for trying to help. I of course know how to get the screens up, what I meant was the settings to get the same response from the Spectral Analyser in Digicheck as on the screen of the ADI series, the correct time constants etc.
Sorry, misunderstood.
I think this can only be answered by RME, as I have doubts that somebody can adjust this properly by "eye-view".
When looking at both analyzer displays, I can merely see any difference. I compared the peak level of a song at 100 Hz, which was more significant and thus less difficult to track with the small display of ADI-2 *.
As the ADI-2 * displays are small, I would anyway propose to work with DIGIcheck where you can adjust different parameters. DIGIcheck's Analyzer offers better overview, y-axis is dynamically adjusted so that you can see the peak levels of frequencies much better and the peak hold function is also very useful.
As a side note … when comparing both analyzer screens (ADI-2 Pro vs. DIGIcheck) then I am missing a peak hold function in the ADI-2 * analyzer screen.
hi, my rme ufx sounding worse.
when i turn on Ms proc The L R sound doesnt go to the right Channel
Please open a new thread.
RME User Forum → DIGICheck → What Analyser settings for same response as ADI hardware?
Powered by PunBB, supported by Informer Technologies, Inc.