• From: Italia
  • Registered: 2021-02-28
  • Posts: 10

Topic: Recomended USB 3.0 cable for UFX+

Hello,

I would like to stop to use USB A to C adapter to connect my UFX+ to my macbook pro.

I have buyed this one but it does not work:

www.amazon.it/dp/B07KF74YYT?psc=1&ref=ppx_yo2ov_dt_b_product_details

Does any one know or understand if it is just a faulty cable, or if it is a wrong model one? In this last case, can anyone suggest the

good cable to buy?

With an A to B cable  and an adapter from A to C the system work fine...

Thank in advance for Your attention!!

Regards
Paolo Giuseppe Bassi
  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,169

Re: Recomended USB 3.0 cable for UFX+

Lindy cables are fine. I am using the Premium cables with 3 shields.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14

3 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,565

Re: Recomended USB 3.0 cable for UFX+

The cable should have worked and therefore must be called defective.

Regards
Matthias Carstens
RME

MC's Website

  • From: Italia
  • Registered: 2021-02-28
  • Posts: 10

Re: Recomended USB 3.0 cable for UFX+

Thank you very much for cable suggestion and for the advise about the cable i have tryed. I am going to sent it back and buy a new one.

Regards
Paolo Giuseppe Bassi
  • From: Canada
  • Registered: 2016-02-11
  • Posts: 87

Re: Recomended USB 3.0 cable for UFX+

Additional info for readers in US/Canada: On my UFX+, I recently switched from Thunderbolt to USB. The Startech active USB 3.1 Gen 1 (5 Gbps) Cable (USB3SAB10M)cable 10m long is working for me. Sold by Amazon.ca It connects as USB3 (5 MB/s) to Windows 11. I also added a dedicated USB PCIe card, as recommended on this forum: Sonnet Allegro Pro Type A USB 3.2 PCIe (USB3-PRO-4P10-E) (sold by AVShop.ca)

ADI-2 pro fs be; UFX+; MADIfaceUSB; Startech active USB3 cable; Sonnet Allegro Pro adapter; Win11x64

6 Reply by ramses (edited by ramses 2023-03-07 21:28:33)

  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,169

Re: Recomended USB 3.0 cable for UFX+

The from you mentioned card has an ASMEDIA USB3 chip.
The "recommended cards" have FL1100 chip as this chipset has been tested well according to RME manual.

But if you see no CRC/Transport errors in driver settings (keep window open for CRC testing) then the card with this particular USB3 ASMedia chipset could be fine.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • From: Canada
  • Registered: 2016-02-11
  • Posts: 87

Re: Recomended USB 3.0 cable for UFX+

Good point about the USB3 chip difference in the newer Allegro card that I had missed. So far, I have "zero" CRC errors with a Buffer Size of 256 Samples.

However, my use does not put many demands on the USB transport. My use is AES stereo input to the UFX+ from a hifi streamer, USB out to my pc for digital room correction, USB return to the UFX+ as 4-channels for output to amps for main speakers and subwoofers.

ADI-2 pro fs be; UFX+; MADIfaceUSB; Startech active USB3 cable; Sonnet Allegro Pro adapter; Win11x64
  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,169

Re: Recomended USB 3.0 cable for UFX+

BTW .. This is the recommended one
https://www.sonnettech.com/product/alle … 4port.html

But you are right, if you get zero transport errors then you should be fine.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14

9 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,565

Re: Recomended USB 3.0 cable for UFX+

The note about ASMEDIA failing is quite old. Expectedly their stuff would start to work some day...maybe that is the case now with their latest chips and chipsets...

Regards
Matthias Carstens
RME

MC's Website

  • From: Italia
  • Registered: 2021-02-28
  • Posts: 10

Re: Recomended USB 3.0 cable for UFX+

ramses wrote:

Lindy cables are fine. I am using the Premium cables with 3 shields.

Hi I have bought  this one!!

https://www.amazon.it/dp/B09ZY8YY4G?psc … ct_details

As soon as I can try it I'll let know

Regards
Paolo Giuseppe Bassi
  • From: Italia
  • Registered: 2021-02-28
  • Posts: 10

Re: Recomended USB 3.0 cable for UFX+

Tonic De Rulo wrote:
ramses wrote:

Lindy cables are fine. I am using the Premium cables with 3 shields.

Hi I have bought  this one!!

https://www.amazon.it/dp/B09ZY8YY4G?psc … ct_details

As soon as I can try it I'll let know


This one work perfectly. The first cable was defective. Thanks to all for attention and help.

Regards
Paolo Giuseppe Bassi