• From: SE USA
  • Registered: 2020-04-29
  • Posts: 23

Topic: Replaced my lost IR Remote for use with ADI-2w Pro FS

Are there instructions activating my new RME IR Remote with a ADI-2 Pro FS? I am having trouble with this. Is there a required firmware version? Instructions?

Thanks,
Billy

GrievousAngel
Live Sound & Recording Studio Owner
Severely influenced by Rock'n Roll!
ADI-2 Pro FS

2 Reply by ramses (edited by ramses 2023-04-05 17:16:15)

  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,186

Re: Replaced my lost IR Remote for use with ADI-2w Pro FS

ADI-2 Pro FS or ADI-2 Pro FS R BE?

ADI-2 Pro FS has no support for remote, see
https://forum.rme-audio.de/viewtopic.ph … 06#p165706
or
https://www.tonstudio-forum.de/blog/ent … ses-en-de/
or
on product-page/-manual: remote not mentioned as a feature therein:
https://archiv.rme-audio.de/products/adi_2-pro.php
http://www.rme-audio.de/download/adi2profs_e.pdf

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • From: Hongkong
  • Registered: 2021-06-30
  • Posts: 720

Re: Replaced my lost IR Remote for use with ADI-2w Pro FS

grievousangel wrote:

Are there instructions activating my new RME IR Remote with a ADI-2 Pro FS? I am having trouble with this. Is there a required firmware version? Instructions?

Thanks,
Billy

The instruction is at the back of the remote.

Pacifist, dumb, not stupid
Listen music out from a box which sounds
Reading words on paper/ screen

4 Reply by ramses (edited by ramses 2023-04-07 11:24:47)

  • ramses
  • DAW Mastermind
  • Online
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 13,186

Re: Replaced my lost IR Remote for use with ADI-2w Pro FS

Johannes AU wrote:
grievousangel wrote:

Are there instructions activating my new RME IR Remote with a ADI-2 Pro FS? I am having trouble with this. Is there a required firmware version? Instructions?

Thanks,
Billy

The instruction is at the back of the remote.

No, there is no support for remote, the IR sensor came with the later model ADI-2 Pro FS R BE.
This is a HW requirement, it can't be added by firmware, so, no way.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub14
  • From: Hongkong
  • Registered: 2021-06-30
  • Posts: 720

Re: Replaced my lost IR Remote for use with ADI-2w Pro FS

ramses wrote:
Johannes AU wrote:
grievousangel wrote:

Are there instructions activating my new RME IR Remote with a ADI-2 Pro FS? I am having trouble with this. Is there a required firmware version? Instructions?

Thanks,
Billy

The instruction is at the back of the remote.

No, there is no support for remote, the IR sensor came with the later model ADI-2 Pro FS R BE.
This is a HW requirement, it can't be added by firmware, so, no way.


Yes, ramses, you are correct.

His signature mentioned adi-pro fs, and in his another post, he already knew that he might be bought it wrong, just wonder if he didn't quote the model right, (his topic is lost
IR remote), then I ask him to check the back of the remote see if he didn't SEL setting it correctly .....

Pacifist, dumb, not stupid
Listen music out from a box which sounds
Reading words on paper/ screen

6 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,586

Re: Replaced my lost IR Remote for use with ADI-2w Pro FS

This thread will be deleted.

Regards
Matthias Carstens
RME

MC's Website