You are not logged in. Please login or register.
RME User Forum → FireWire & USB series → [Solved] 48V and PAD not appearing in TotalMixFX inputs
The manual seems so simple. I've spent over an hour pouring thru the manual and I CANNOT find the 48v on off switch in TMX or on the UFX II screen. I can't find a master on/off. The manual makes it seem like they will appear on the input channels by clicking on the spanner. DOES NOT WORK.
I need some help, badly.
Sure you clicked the right wrench tool on the right channel ?
48 V only appears on Hardware Input channels that have a microphone input
yes, absolutely
You can download the latest version of Totalmix separately from here :
https://forum.rme-audio.de/viewtopic.ph … 72#p202472
and just drag it into your applications folder.
Maybe I'm not understanding, but that download did nothing. Attempting to run the .exe only opened the same TotalMixFX. No update or change took place.
No worry, then you had already the latest version.
May you provide a screenshot of your Totalmix ?
What happens when you click the spanner ?
Is the channel opening with missing buttons or is it not opening at all ?
One needs to exit TM FX first before replacing the app.
I am still wondering if channels 9 to 12 were tried.
Correct! After hours of effort, I called Synthax and within 15 minutes Ryan Coalson from sales, filling in for the tech support guy, Jeff called med. Not much later the issue was solved. I'm going to scour the manual again to see where I missed this. Thanks for the replies!
RME User Forum → FireWire & USB series → [Solved] 48V and PAD not appearing in TotalMixFX inputs
Powered by PunBB, supported by Informer Technologies, Inc.