• Registered: 2023-08-04
  • Posts: 3

Topic: Click om frist 8 indputs UFX

Hi folks
I have been using RME interfaces for Many years, now use ufx. Never had any problems, before now.
I have startet to experience small clicks om the frist 8 indput channels, even when nothing is Connected? ( happens once every minute or so )
Anyone had this issue? Please help :-)

  • waedi
  • DAW Mastermind
  • Online
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,488

Re: Click om frist 8 indputs UFX

Hi Thomas

pops and clicks can be caused by total different reasons.
Mac or PC ?
Driver version ?
Firmware version ?

Is this clicking visible in Totalmix ?
Is it on all 8 input channels at the same time one click on all channels or is it clicking randomly on these 8 channels ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2023-08-04
  • Posts: 3

Re: Click om frist 8 indputs UFX

"Is this clicking visible in Totalmix ?" : yep

"Is it on all 8 input channels at the same time one click on all channels or is it clicking randomly on these 8 channels ?" :
8 inputs only

Thanks for helping out :-)

  • waedi
  • DAW Mastermind
  • Online
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,488

Re: Click om frist 8 indputs UFX

Can be symptom of a dying internal PSU, may you contact the service partner near you.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,766

Re: Click om frist 8 indputs UFX

Does this also happen without a connection to the computer?

Regards
Daniel Fuchs
RME

RME Support's Website

  • From: Germany, Tuvalu, Poland, Chile
  • Registered: 2021-07-27
  • Posts: 463

Re: Click om frist 8 indputs UFX

"Is it on all 8 input channels at the same time one click on all channels or is it clicking randomly on these 8 channels ?" :
8 inputs only

big_smile

So... same time? Or randomly?

However... i had a similar behavior a few months ago:
Random clicks on different channels, also visible in TMFX.

The reason was: My Unit was connected through a USB Docking Station (or Hub), where different other devices (HDDs, etc)  were connected, too. Maybe it was related due to insufficent power or bandwidth...

-> I changed the the Unit's USB connection to another USB Bus of the Host - Problem was gone.
Maybe it helps ;-)

“Do It For Her”
My Gear: Bontempi Magic light Keyboard
  • Registered: 2023-08-04
  • Posts: 3

Re: Click om frist 8 indputs UFX

same time

I will try changing the port
thanks :-)