1 Topic by zabukowski (edited by zabukowski 2023-10-04 14:49:16)

  • From: Slovenia
  • Registered: 2008-07-18
  • Posts: 11

Topic: [Solved] DIGICHECK not working with brand new UCXII

Windows 10 ... all programs detecting RME ASIO Fireface USB driver, except DIGICHECK.

It founds only RME Hammerfall DSP ASIO driver, which i've never installed and i've never had that card in the past.

The latest RME drivers and Digicheck 5.92 installed. Totalmix and control panel are working correctly.

Strange enough, on the same machine, 1st gen Babyface is properly detected and working with Digicheck !!??!! Even when connected at the same time, UCX is not detected, Babyface is.

Any ideas, i can't live without Digicheck. ??

Thx!

zabukowski's Website

2 Reply by zabukowski (edited by zabukowski 2023-10-04 15:07:04)

  • From: Slovenia
  • Registered: 2008-07-18
  • Posts: 11

Re: [Solved] DIGICHECK not working with brand new UCXII

Another observation: when both cards are connected, ASIO Fireface USB driver is detected in DIGICHECK. This way, signal from UCXII is shown in DIGICHECK as well. If i turn Babyface off, signal from UCX dissapears (and finally got blue screen).

I understand this is because there is the same driver for both cards.

So the main question is still, why DIGICHECK doesn't detect proper driver with only UCX connected.

zabukowski's Website

  • From: Haimhausen
  • Registered: 2012-04-02
  • Posts: 250

Re: [Solved] DIGICHECK not working with brand new UCXII

You need to use the latest Digicheck 5.96: https://rme-audio.de/downloads/dc_596_win.zip or the new Digicheck NG: https://forum.rme-audio.de/viewtopic.php?id=37403

Regards,
Audio AG Support

Audio AG Support's Website

  • From: Slovenia
  • Registered: 2008-07-18
  • Posts: 11

Re: [Solved] DIGICHECK not working with brand new UCXII

Audio AG Support wrote:

You need to use the latest Digicheck 5.96: https://rme-audio.de/downloads/dc_596_win.zip or the new Digicheck NG: https://forum.rme-audio.de/viewtopic.php?id=37403

Ah, thank you - now it's working !

Cheers,
Franci

zabukowski's Website

5 Reply by zabukowski (edited by zabukowski 2023-10-05 07:53:42)

  • From: Slovenia
  • Registered: 2008-07-18
  • Posts: 11

Re: [Solved] DIGICHECK not working with brand new UCXII

Unfortunately, after whole day of work, today, after booting computer, problems are back.

Digicheck 5.96 won't start anymore, it closes automatically after second or two with no message (reinstalling doesn't help).
And additionally, Digicheck NG can't see any audio device.

This is really strange ... TotalMix and RME Settings look and work completely normally.

Any idea?
Thx!

EDIT: after reinstalling drivers & digicheck, everything started to work normally again - i hope it will stay like that.

zabukowski's Website