You are not logged in. Please login or register.
RME User Forum → TotalMix FX → [Solved] Fireface 800 matrix routing help
Hi,
I'm trying to set up my Babyface Pro as a master and Fireface 800 as the slave to increase the number of inputs I have.
Clock mode: Autosync
Preferred Sync Ref / input statys: ADAT 1
Store: Check
Now I'm trying to figure out how to do the routing in the Totalmix Matrix, but I can't seem to find a guide that shows me the current TM version, so I'm a bit stuck.
Is this correct?
An 7/8 to ADAT 1/2
An 9/10 to ADAT 3/4
Yes
An 7/8 input to ADAT 1/2 output
An 9/10 input to ADAT 3/4 output
In the Babyface Totalmix in the Adat input channels 1 to 4 the four mics of the FF800 should arrive.
I tried the routing and saved the settings by clicking "Store current State into Device / Flash Mixer". But there is no signal coming through when I try the different outputs.
https://drive.google.com/file/d/1usqK4k … share_link
I notice that the Babyface Pro Totalmix shows AS 1/2 and then ADAT 3/4 instead of beginning with ADAT 1/2. Is this something I need to consider?
Also, the host-led is red.
Any suggestions?
Try this :
In the Babyface the AS12 stands for Adat or SPDIf 1/2, in the Fireface settings you can activate SPDIF, as you don't use it, nothing to worry about.
Great stuff! Seems to work as intended. Thank you very much.
Glad you can work
RME User Forum → TotalMix FX → [Solved] Fireface 800 matrix routing help
Powered by PunBB, supported by Informer Technologies, Inc.