1 Topic by Thermaltake (edited by Thermaltake 2024-01-09 20:11:56)

  • From: Croatia
  • Registered: 2010-08-27
  • Posts: 236

Topic: [Solved]UCX II not showing output or input with driver 1.249

Win 10 latest updates and all that.

Flashed latest firmware for ROOM EQ on my UCX II (successfully) turn it off and on again, and then install latest drivers(Run as Admin.), but no sound source in sound, I can't get sound to work now. In device manager everything is fine. USB is connected. Help...

https://i.ibb.co/QnVrSJK/1.jpg

2 Reply by Thermaltake (edited by Thermaltake 2024-01-09 20:29:27)

  • From: Croatia
  • Registered: 2010-08-27
  • Posts: 236

Re: [Solved]UCX II not showing output or input with driver 1.249

Tried on laptop, same thing...is my UCX II now faulty... and I'm just out of warranty. sad

  • Registered: 2016-06-14
  • Posts: 1,142

Re: [Solved]UCX II not showing output or input with driver 1.249

(Cold) reboot doesn’t help?

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2

4 Reply by Thermaltake (edited by Thermaltake 2024-01-09 20:47:14)

  • From: Croatia
  • Registered: 2010-08-27
  • Posts: 236

Re: [Solved]UCX II not showing output or input with driver 1.249

oli77sch wrote:

(Cold) reboot doesn’t help?

Nop, tried to shutdown UCX II and PC, disconnect the adapter from outlet for minute, and plug it in still nothing.

Like I said tried on laptop same thing, it won't see outputs or inputs anymore sad

I flashed all kinds of RME cards for years now, and never had any problem, until now.

  • Registered: 2023-06-30
  • Posts: 161

Re: [Solved]UCX II not showing output or input with driver 1.249

1) What about ASIO applications? Can they access the interface?
2) Are you sure you have WDM devices configured properly in driver's control panel?

Fireface UCX II + ARC USB > ADI-2 Pro FS R BE > Neumann KH 750 DSP + MA 1 > KH 120 A

6 Reply by Thermaltake (edited by Thermaltake 2024-01-09 22:00:06)

  • From: Croatia
  • Registered: 2010-08-27
  • Posts: 236

Re: [Solved]UCX II not showing output or input with driver 1.249

1. Cubase is seeing it

2. Oh damn after reinstall it was set on 0 by default... now I set it to 10. It's okay now everything is like it should be big_smile Thanks!