• Registered: 2020-05-18
  • Posts: 12

Topic: [Solved] Digicheck NG 0.90 - Lost Playback Channels

Hey All,

I updated the driver and flash update for the UFX+  total mix v1.93 and now do not have the option to add playback channels in Digicheck NG. it was working before i updated Total Mix and the UFX+.  I have re installed DIGICHECK and the problem persists. Any thoughts?

Thanks Much

2 Reply by waedi (edited by waedi 2024-01-31 01:09:29)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,522

Re: [Solved] Digicheck NG 0.90 - Lost Playback Channels

In Digicheck Options Audio Device Setup there is the feature enabled ? "add playback channels" ?
I use the same Totalmix version (1.93) and the same Digicheck NG version (0.90) and the playback channels working fine.
It is not the UFX+ here, only a Digiface USB.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2020-05-18
  • Posts: 12

Re: [Solved] Digicheck NG 0.90 - Lost Playback Channels

the option for the playback channels is greyed out. no ability to change the status.

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,522

Re: [Solved] Digicheck NG 0.90 - Lost Playback Channels

The UFX+ has the latest firmware on ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue

5 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,582

Re: [Solved] Digicheck NG 0.90 - Lost Playback Channels

Which driver is used here? Just checked with 4.10, works.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2020-05-18
  • Posts: 12

Re: [Solved] Digicheck NG 0.90 - Lost Playback Channels

I believe it is the latest driver... i am using Room EQ

  • Registered: 2020-05-18
  • Posts: 12

Re: [Solved] Digicheck NG 0.90 - Lost Playback Channels

Update. i thought that i was on driver 4.10.... i guess i was not, though i know that i had updated to be able to use the new room EQ + crossfeed features.  i reinstalled the driver and playback channels work... again

thanks much