• Registered: 2024-02-15
  • Posts: 3

Topic: routing in to out on linux with ffado

hello,
i'm on linux but it should be similar i have connected to my fireface 400 my two modular synth on the in 1,2 and  3 and i want to make on aux send with my sherman fimterbank(he s on in 5 and i hear it)the out 3 go to the in of the sherman  .
i succeed into hear my synth(easy) but when i try to send signal to the sherman i don't know how to do maybe i'm missing a part of the manual.
thanks in advance for your answers

ju

2 Reply by waedi (edited by waedi 2024-02-16 03:08:46)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,789

Re: routing in to out on linux with ffado

In Totalmix click onto the hardware output channel 3.
It gets highlighted (active), then pull-up the fader of hardware input channels 1, 2 or 3 (sending synth signal to output 3 to the Sherman)
Don't pull-up fader of input 5 (while output 3 is active) it would create a feedback thru the Sherman !

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2024-02-15
  • Posts: 3

Re: routing in to out on linux with ffado

i will try tonight or this afternoon i came back soon,thanks

4 Reply by waedi (edited by waedi 2024-02-16 05:02:18)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,789

Re: routing in to out on linux with ffado

I overlooked you are on Linux, you don't have a working Totalmix and the standalone functionality of the FF400 is probably not sufficient for routing. You may have to do the routing in Totalmix on another computer and use the FF400 afterwards on Linux as it keeps the routing in memory for standalone work.
Is Ffado a channel routing software ? you want use it instead of Totalmix ?
I doubt this can communicate with the FF400.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2016-06-14
  • Posts: 1,142

Re: routing in to out on linux with ffado

waedi wrote:

Is Ffado a channel routing software ? you want use it instead of Totalmix ?
I doubt this can communicate with the FF400.

ffado.org - I also didn’t know about it before.

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2

6 Reply by waedi (edited by waedi 2024-02-16 11:08:49)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,789

Re: routing in to out on linux with ffado

It seems to be a firewire audio "class compliant" driver for Linux.
The FF400 needs to be prepared in advance. On Windows or Mac.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2016-06-14
  • Posts: 1,142

Re: routing in to out on linux with ffado

waedi wrote:

It seems to be a firewire audio "class compliant" driver for Linux.

I think it’s more than just that. But the informations on the website aren’t very useful…

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
  • Registered: 2024-02-15
  • Posts: 3

Re: routing in to out on linux with ffado

with ffado we could routing everything but not exactly as totalmix

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,789

Re: routing in to out on linux with ffado

For using the FF400 in your scenario you have to use Totalmix to prepare the unit, there is no way around this.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue