• Registered: 2023-11-03
  • Posts: 9

Topic: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

Hi,

Is it okay to connect my Korg Minilogue XD to inputs 3 and 4 on my Babyface PRO? The manual says these inputs have high impedance, so I'm using the Gain knob in Total Mix to boost the signal. Does this affect the sound quality? Should I buy different cables and connect the synth to the inputs on the back panel instead?

Thanks in advance.

2 Reply by oli77sch (edited by oli77sch 2024-03-08 12:23:44)

  • Registered: 2016-06-14
  • Posts: 1,142

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

Hi
Inputs 3/4 are fine for line level signals. Both Korg outputs and Babyface pro inputs are unbalanced, so that matches.

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
  • Registered: 2023-11-03
  • Posts: 9

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

Thanks. Does the fact that I have to amplify the signal using the Gain button (in Total Mix) affect the sound quality?

oli77sch wrote:

Hi
Inputs 3/4 are fine for line level signals. Both Korg outputs and Babyface pro inputs are unbalanced, so that matches.

4 Reply by waedi (edited by waedi 2024-03-08 16:00:41)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,542

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

Kostya wrote:

Thanks. Does the fact that I have to amplify the signal using the Gain button (in Total Mix) affect the sound quality?

No
Did you try max output on the Minilog and no input gain in Totalmix ?
Should be fine.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2023-11-03
  • Posts: 9

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

I turned the Master knob on Korg to the maximum. And then the RMS reaches -24db in Ableton Live. Then I amplify the signal by 7 db using the Gain knob on TotalMix and then the signal becomes acceptably loud. Around -12 db. The audio sounds okay to me, but I'm not sure if I'm doing this the right way.


waedi wrote:
Kostya wrote:

Thanks. Does the fact that I have to amplify the signal using the Gain button (in Total Mix) affect the sound quality?

No
Did you try max output on the Minilog and no input gain in Totalmix ?
Should be fine.

  • Registered: 2016-06-14
  • Posts: 1,142

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

To what level are the Babyface inputs set? -10dBV or +4dBu?

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
  • Registered: 2023-11-03
  • Posts: 9

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

+4dBu


oli77sch wrote:

To what level are the Babyface inputs set? -10dBV or +4dBu?

8 Reply by oli77sch (edited by oli77sch 2024-03-08 20:26:52)

  • Registered: 2016-06-14
  • Posts: 1,142

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

With -10dBV you would get a bit hotter signal and another step up you go with 'boost'.

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
  • Registered: 2023-11-03
  • Posts: 9

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

wow! It works much better now! Thank you

oli77sch wrote:

With -10dBV you would get a bit hotter signal and another step up you go with 'boost'.

  • Registered: 2016-06-14
  • Posts: 1,142

Re: Is it okay to connect Korg Minilogue XD to inputs 3 and 4

Kostya wrote:

wow! It works much better now! Thank you

Glad to hear! Anyway, I wonder about the low output of the Minilogue.

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2