• Registered: 2020-03-13
  • Posts: 24

Topic: No Total Mix Window …….Mac OS 10.15 Catalina BF Pro

So for some reason Total Mix will not load a mixer page. If I click on “New Mixer Window” it brings up the “Function & Device Select Window” but there is nothing in the window to select?
It’s a pretty old system 2012 Mac Mini with 16 GB RAM, OS 10.15. RME Babyface Pro. It has been working with no problem. Fireface settings are loading. I do intend to upgrade to a newer 2018 Mac Mini with 64 GB RAM very soon…meanwhile…..

2 Reply by waedi (edited by waedi 2024-03-17 22:10:09)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,563

Re: No Total Mix Window …….Mac OS 10.15 Catalina BF Pro

Sure the Babyface is not set to CC-mode by mistake ?
Press and hold the two buttons during power-up, SELECT and DIM.
The level meter LEDs will show a PC or CC (CC-mode)

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2020-03-13
  • Posts: 24

Re: No Total Mix Window …….Mac OS 10.15 Catalina BF Pro

Oh yes I have covered the CC compliant mode reboot. Still no Mixer window. About to reboot the whole setup this morning.

  • Registered: 2020-03-13
  • Posts: 24

Re: No Total Mix Window …….Mac OS 10.15 Catalina BF Pro

Still no mixer window appearing. I’m stumped?

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,563

Re: No Total Mix Window …….Mac OS 10.15 Catalina BF Pro

Then we should check the firmware and driver version.
Can you read out ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2020-03-13
  • Posts: 24

Re: No Total Mix Window …….Mac OS 10.15 Catalina BF Pro

So I have tried to update the firmware on the RME Babyface Pro. Again nothing happens. I download the update hit the US Flash software and the window comes up showing that my firmware is indeed way out of date. 125 when the current revision is 206! I click on ‘Update” …nothing happens….what is going on here…..bit frustrating when I am trying to finish up a track!!!

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,563

Re: No Total Mix Window …….Mac OS 10.15 Catalina BF Pro

For the FUT a working driver is needed.
you have to install an older driver version 331
Then run the FUT and after success instal the latest driver 410

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue

8 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,600

Re: No Total Mix Window …….Mac OS 10.15 Catalina BF Pro

This is macOS 10.15, so he needss to install driver 3.223.

Regards
Matthias Carstens
RME

MC's Website