1 Topic by jeneratethis (edited by jeneratethis 2024-03-23 22:19:45)

  • Registered: 2024-03-23
  • Posts: 2

Topic: USB Flash tool (not) running

Greetings,
I just updated my Intel Mac Mini to Sonoma (14.4). I installed the latest device driver (for UCX USB) before figuring out that I needed the firmware flash. During that install process, I did Allow RME security access (thru system prefs)

I then watched the Kernel vs Extensions video. Jumped into Recovery mode and tied to put the Security settings to Reduced but under Sonoma Reduced isn't a option, only Medium. So I set it to Medium and rebooted. I grabbed the "fut_usb_mac.zip" installer and ran it. It opens and recognizes the UCX, but clicking on Update does nothing. No progress bar change. Also, in the Activity monitor the app is running but not really doing much at all.

Help me Obi-Wans, you're my only hope. ;-)
Thanks!

2 Reply by waedi (edited by waedi 2024-03-23 22:57:29)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,539

Re: USB Flash tool (not) running

The FUT needs a working driver.
You have to install an old driver prior to flash.
Use the usb_mac_331 driver
After success FUT, install the usbdk_mac_410 driver.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2016-06-14
  • Posts: 1,142

Re: USB Flash tool (not) running

Yes, what waedi writes!
Reduced security is needed for kernel extension driver but not for driverkit one. That’s exactly the reason why RME developed the new drivers.
Sadly the kext driver is necessary to install the updated firmware on some older interface models.

UCX - FF 400 - Babyface pro - Digiface USB - ADI-2 (original)
Mac mini M1 - Macbook pro - iPad Air2
  • Registered: 2024-03-23
  • Posts: 2

Re: USB Flash tool (not) running

Thanks folks. That worked. It's mostly a repeat of what I did previously but this time it worked. So clearly I missed something the first time.

Thanks for your time cool

  • Registered: 2018-03-12
  • Posts: 9

Re: USB Flash tool (not) running

Sorry to dredge an old topic but I'm having the same issue and the only old driver available for me on sonoma is driver_usb_mac_333. I am not able to use the driver update at all.  Sonoma 14.7 Mac studio M1 processor.  Appreciate any guidance.

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,774

Re: USB Flash tool (not) running

What exactly is the problem here? Of course the update will also work with 3.33.

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2018-03-12
  • Posts: 9

Re: USB Flash tool (not) running

The exact problem seems to be that the flash tool does not stay running.  It will open and close almost immediately.  It does not give me a window to see anything really.  thanks for the reply.

  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,665

Re: USB Flash tool (not) running

You will need to set the system to "Reduced Security Mode" in order to install the KEXT driver on an Apple Silicon system.

See here: https://rme-audio.de/rme-macos.html

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website

9 Reply by teva.cue (edited by teva.cue Yesterday 14:30:03)

  • Registered: Yesterday
  • Posts: 1

Re: USB Flash tool (not) running

I've had the exact same problem as jeneratethis, same specs (Sonoma 14.4.1, M1)

I have tried what waedi said.

But as shooten said, now only the driver_usb_mac_333 is available, the 331 is not there anymore.

I've installed the driver_usb_mac_333, restarted my computer, and when I try now to open the "fut_usb_mac.zip", the window doesn't even appear.

Maybe it doesn't work with the 333 version and only works with the 331?

Thank you for your help

10 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: USB Flash tool (not) running

I doubt that the interface works. You can play and record audio? If not then the driver is not active, and then the FUT will not start. There is no functional difference between 3.31 and 3.33, both work when installed correctly as described in detail in the readme and in post #8.

Regards
Matthias Carstens
RME

MC's Website