• Registered: 2024-09-24
  • Posts: 3

Topic: RME M32 AD problem with recognizing analog channels

Hi,

Ive got MADIFace with M32 DA and M32 AD. I have problem with DB25 x8TRS connection to M32 AD. When DB25 is connected to Line 1-8 in AD channels are routed like this
DB25 chan.1 is going to AD INPUT 8
DB25 chan.2 -> AD INPUT 6
DB25 chan.3 -> AD INPUT 4
DB25 chan.4 -> AD INPUT 2
DB25 chan.5 -> AD INPUT 8
DB25 chan.6 -> AD INPUT 6
DB25 chan.7 -> AD INPUT 4
DB25 chan.8 -> AD INPUT 2

As you see it goes only to even numbers INPUTS and its doubling. What could causing these? Bad soldering of DB25 cable or maybe bad configuration of RMEs devices?

Thanks!

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,522

Re: RME M32 AD problem with recognizing analog channels

If you change sample rate from 96 to 48 is there a change ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue

3 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,582

Re: RME M32 AD problem with recognizing analog channels

That sounds like the Tascam cable is soldered incorrectly. Where did you buy this?

Regards
Matthias Carstens
RME

MC's Website