• Registered: 2024-10-14
  • Posts: 3

Topic: Sonarworks Headphone Corrective EQ in TotalMix?

Hi all,

I was wondering if the headphone corrective EQ profiles generated by Sonarworks could be loaded to headphone output channels in TotalMix (of the UFX III)?

I didn’t see anything explicitly written about this in the manual so I figured I’d ask here.

I’m assuming it would be the same as applying the room corrective EQ to a normal output?

Thanks in advance,

Phil

  • From: Germany, Tuvalu, Poland, Chile
  • Registered: 2021-07-27
  • Posts: 410

Re: Sonarworks Headphone Corrective EQ in TotalMix?

See: https://www.sonarworks.com/soundid-refe … rme-family
scroll down to: "Frequently asked questions"
and look for: "Can I export a headphone calibration profile too?"

“Do It For Her”
My Gear: Bontempi Magic light Keyboard

3 Reply by Palaver (edited by Palaver 2024-10-14 23:38:38)

  • Registered: 2024-10-14
  • Posts: 3

Re: Sonarworks Headphone Corrective EQ in TotalMix?

maggie33 wrote:

See: https://www.sonarworks.com/soundid-refe … rme-family
scroll down to: "Frequently asked questions"
and look for: "Can I export a headphone calibration profile too?"

Thanks for this!

Unfortunately, it says it does not support headphone calibration.

Can anyone from RME comment on whether or not TotalMix will support headphone calibration from Sonarworks in the future?

Thanks again,
Phil

4 Reply by mukundasik (edited by mukundasik Yesterday 00:33:36)

  • Registered: 2024-06-20
  • Posts: 6

Re: Sonarworks Headphone Corrective EQ in TotalMix?

Palaver wrote:
maggie33 wrote:

See: https://www.sonarworks.com/soundid-refe … rme-family
scroll down to: "Frequently asked questions"
and look for: "Can I export a headphone calibration profile too?"

Thanks for this!

Unfortunately, it says it does not support headphone calibration.

Can anyone from RME comment on whether or not TotalMix will support headphone calibration from Sonarworks in the future?

Thanks again,
Phil

+1

it's interesting for me also!

Please, dear RME, comment on this.

thanks

Hare Krishna )

5 Reply by ramses (edited by ramses Yesterday 09:23:05)

  • ramses
  • DAW Mastermind
  • Offline
  • From: UTC+1
  • Registered: 2012-10-14
  • Posts: 12,965

Re: Sonarworks Headphone Corrective EQ in TotalMix?

Why do you want to ask RME? It sounds more like a limitation of Sonarworks, read the Sonarworks FAQ again:

     Can I export a headphone calibration profile too?
     No, only speaker profile export is supported.
   
If you look at the TM FX phones outputs:
you see there RoomEQ and the same functions (including import and export) like on any other HW output.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13
  • From: Haimhausen
  • Registered: 2012-04-02
  • Posts: 224

Re: Sonarworks Headphone Corrective EQ in TotalMix?

You can do it manually if you want: https://www.reddit.com/r/oratory1990/wi … f_presets/

Regards,
Audio AG Support

Audio AG Support's Website

  • Registered: 2024-10-14
  • Posts: 3

Re: Sonarworks Headphone Corrective EQ in TotalMix?

ramses wrote:

Why do you want to ask RME? It sounds more like a limitation of Sonarworks, read the Sonarworks FAQ again:

     Can I export a headphone calibration profile too?
     No, only speaker profile export is supported.
   
If you look at the TM FX phones outputs:
you see there RoomEQ and the same functions (including import and export) like on any other HW output.

Once again, this is really helpful. I’m considering purchasing a UFX III, and I don’t have the product to see “Room EQ” on the headphones at the moment.

Not an issue if I have to input the profiles manually. That’s not a concern on my end.

Once again, I’m trying to learn the Sonarworks product in conjunction with RME.

Thanks for your patience, and hopefully this thread helps out others in the same boat!

So it looks like we can put in the Sonarworks headphone correction by using the “Room EQ” option.., but manually. That’s awesome.

Cheers,
Phil