1 Topic by roy75342 (edited by roy75342 2024-12-08 18:22:47)

  • Registered: 2023-07-31
  • Posts: 14

Topic: Updates and Trouble

Hi, I'm having an issue with my computer where sometimes the volume gets a bit lower, and then the screen seems to restart itself for a second (it completely turns off and on), and then suddenly the volume goes up too.

I suspect it's related to the sound card (UCX II) because that's where the sound is coming from.
So first, I updated the driver and firmware, and I have a few questions:

1. After the updates, how do I know if the updates were successful? and where can i check that is the last and correct version
2. In the computer's sound settings, I can choose between Speakers/Analog 3+4/Analog 5+6. I've always been on Speakers. Could this be the problem?
3. What else could it be if this continues and it's not the sound card?

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,843

Re: Updates and Trouble

The Fireface USB Settings dialog shows the current version of firmware and driver of your system.
Read out the version numbers and compare with the product page driver section.
Or post here and we will let you know if it is up-to-date.

Is the screen a desktop monitor connected to a Windows computer ?

Did you open the computer housing and clean out the dust ?
May be the graphics card is overheating or the internal power supply of the computer is getting broke ?

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2023-07-31
  • Posts: 14

Re: Updates and Trouble

waedi wrote:

The Fireface USB Settings dialog shows the current version of firmware and driver of your system.
Read out the version numbers and compare with the product page driver section.
Or post here and we will let you know if it is up-to-date.

Is the screen a desktop monitor connected to a Windows computer ?

Did you open the computer housing and clean out the dust ?
May be the graphics card is overheating or the internal power supply of the computer is getting broke ?


Where can i see the Dialog?

YES its screen of XIAOMI

about open my computer
im afraid to touch and ruin it how i can i do it?
its seems like everything is work great except this one

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,843

Re: Updates and Trouble

The Fireface USB Settings is a program, like Totalmix it should be start by the icon in the tray at the bottom or use the search field in Windows.

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue
  • Registered: 2023-07-31
  • Posts: 14

Re: Updates and Trouble

waedi wrote:

The Fireface USB Settings is a program, like Totalmix it should be start by the icon in the tray at the bottom or use the search field in Windows.

ITS ON MY DESKTOP BAR

the driver is the last version also the flash update
now im downloading the ast version of total mix 1.97 but its stiil does that

6 Reply by waedi (edited by waedi 2024-12-22 16:59:19)

  • waedi
  • DAW Mastermind
  • Offline
  • From: Swiss Zürich
  • Registered: 2020-12-08
  • Posts: 4,843

Re: Updates and Trouble

You can try connect the loudspeakers to another port and adapt the speaker settings in the computer.
Are these loudspeakers active monitors ?
Sure they work correct ? They could fail when getting hot...

M1-Sequoia, Madiface Pro, Digiface USB, Babyface silver and blue

7 Reply by roy75342 (edited by roy75342 Today 10:57:00)

  • Registered: 2023-07-31
  • Posts: 14

Re: Updates and Trouble

waedi wrote:

You can try connect the loudspeakers to another port and adapt the speaker settings in the computer.
Are these loudspeakers active monitors ?
Sure they work correct ? They could fail when getting hot...

I work with ADAM T7V i trun off them and the UCXII every night
They are CONNECTED to the Main OUTPUT in the RME
and on the PC speaker when you choose from where you waht to hear
its on speaker mode like this
https://we.tl/t-UI0YatqSDI


BTW i hear everything really good
its the screen (XIAOMI) that jump for a second and then the Volume change
sound and rest is still HI FI only the level of the Volume