• Registered: 2007-12-25
  • Posts: 3

Topic: HDSP9652 muliti card control panel settings

Hello all,

There is a SAC rig out on the road with Tesla and has a WC issue.
I'm in contact with the FOH

2 HDSP 9652 into 5 Aphex pres

A thread was started by me at the SAW forum.

SAC Forum

If you can help out please chime in.

Thanks
Hap

  • From: Houston, TX
  • Registered: 2007-05-11
  • Posts: 1,191

Re: HDSP9652 muliti card control panel settings

Seems like he got it sorted out (the 9652's expansion card ribbon cable came loose per the link above).  Nice setup!


cool

MADIface-XT+ARC / 3x HDSP MADI / ADI648
2x SSL Alphalink MADI AX
2x Multiface / 2x Digiface /2x ADI8

3 Reply by HapHazzard (edited by HapHazzard 2010-07-11 01:56:02)

  • Registered: 2007-12-25
  • Posts: 3

Re: HDSP9652 muliti card control panel settings

OK
An old question

If you have 2 HDSP9652 with one being the master and #2 in auto sync, do I need a coax to come from card #1 WC out to card #2 WC in and then from WC out of card #2 on to the pre-amps using "T"

Or

Come from card #1 to the other card and pre-amps using "T"

Or do I not need the coax and just let the second card sync internally?

Randyman, His rig should should be the envy of the town after we shake it down a bit.

Hap