• From: norway
  • Registered: 2010-07-18
  • Posts: 2

Topic: Rme qs and hammerfall aes-32 setup

Hie!

I just bought an RME ADI-8 QS converter and HDSP AES-32 cards.

I`m kind of a medium, not quite a newbie on this area, but I have only used my Onyx400f for recording and mixing till now.

I use Tracktion3 software cause it`s the easiest and fastest for me when working with audio (I am also trained in protools, but since I play and record 60-70`s rock music, I dont need all the features in PT, just plug and play guitars, drums, basses.....)

I need help setting up my new system, so I dont make any fatal mistakes with my gear.....etc!

How do I connect the QS and the AES-32 to my computer\old interface and my reference monitors to get the best possible sound quality when mixing\recording and bouncing mixes to tape?

            This is my gear: PC-intel duo 2x2.2Ghz 4gbram windows xp
                                  Universal Audio LA-610
                                  SSL Channel strip (one channel)
                                  Soundcraft Spirit m-8 series mixer
                                  Mackie Onyx400f soundcard
                                  RME ADI-8 QS and Hammerfall DSP AES-32 cards
                                  Tascam 8-channel reel to reel tape recorder (with sync?)

Thanks a lot to anyone helping me out-Thomas:)

  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,674

Re: Rme qs and hammerfall aes-32 setup

Hi Thomas,

Connect the ADI-8 QS to the HDSP AES-32 with a 25 pin Tascam AES/EBU cable, like this.

Other than this, it's quite straightforward; outs go to ins, ins go to outs. The 400f is not much use any more, unless you want to use it stand alone as a mic preamp. Then you would just use the analog outs of the 400f.

If you're having trouble with something specific, please let me know.

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website