• Registered: 2010-10-02
  • Posts: 7

Topic: Panning not unified (AN1+2) FF400

Hi.

I have routed on TotalMix my playback channels Out 1 + 2 to Outputs 1+2 (where my speakers are plugged).
my problem is that the meters show that Output 2 is 5-8dB lower than Output 1.
the meters on the playback channels are unified and panning is correct (R1L1) plus i have tried to play multiple programs to see if the root to the problem comes from there but that didn't help.
windows xp sound setting are correct too. HELP


Thanks !

2 Reply by Randyman... (edited by Randyman... 2010-10-02 23:30:31)

  • From: Houston, TX
  • Registered: 2007-05-11
  • Posts: 1,191

Re: Panning not unified (AN1+2) FF400

Stating the obvious - Are you output faders linked - or at least set to the same exact level?  And are you in Submix Mode?

cool

MADIface-XT+ARC / 3x HDSP MADI / ADI648
2x SSL Alphalink MADI AX
2x Multiface / 2x Digiface /2x ADI8
  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,751

Re: Panning not unified (AN1+2) FF400

Try loading a mixer factory preset. If the level imbalance is visible in the middle row of Totalmix, then it's happening in your audio software.


Regards
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2010-10-02
  • Posts: 7

Re: Panning not unified (AN1+2) FF400

i'm not on submix and my faders are linked!
and there is no imbalance in the middle row of totalmix.
where can i find the factory preset for TM?

  • Jeff
  • Jeff
  • Moderator
  • Offline
  • From: USA
  • Registered: 2007-05-21
  • Posts: 4,661

Re: Panning not unified (AN1+2) FF400

CTRL + Preset 1 button

Regards,
Jeff Petersen
Synthax Inc.

Jeff's Website

  • From: Houston, TX
  • Registered: 2007-05-11
  • Posts: 1,191

Re: Panning not unified (AN1+2) FF400

You might WANT to be in Submix Mode.  There is a chance you aren't seeing the correct middle row "Destination" if you're not in Submix Mode.  I always use Submix Mode FWIW - it just makes Totalmix's vast power that much easier to manipulate IMNSHO...

Selecting the Preset should get you back to a known state as well...

cool

MADIface-XT+ARC / 3x HDSP MADI / ADI648
2x SSL Alphalink MADI AX
2x Multiface / 2x Digiface /2x ADI8
  • Registered: 2010-10-02
  • Posts: 7

Re: Panning not unified (AN1+2) FF400

I tried everything you said and no luck sad

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,751

Re: Panning not unified (AN1+2) FF400

Where do you see the imbalance? Please upload/mail jpg screenshots of matrix and mixer.


Regards
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2010-10-02
  • Posts: 7

Re: Panning not unified (AN1+2) FF400

Problem fixed! i reinstalled for the 2nd time the ff drivers and the imbalance disappeared.

Thanks for your help!