• Registered: 2009-01-31
  • Posts: 8

Topic: Fireface and Alesis AI2

Hello,

My fireface 800 doesn't clock an Alesis Ai-2. I connect WC by BNC, the fireface lock the signal but don't sync. Cable is a short Canare 75 Ohms. I also have an alesis HD24XR who clock perfectly the AI-2.

Please, help me.

Thanx in advance.

RH

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,547

Re: Fireface and Alesis AI2

rherrero wrote:

the fireface lock the signal but don't sync.

What exactly does this refer to? Which way is the BNC connection?


Regards
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2009-01-31
  • Posts: 8

Re: Fireface and Alesis AI2

The BNC connection is :

WC out AI2 ---> WC in fireface. I actually use a T on the fireface input for clocking an Alesis HD24XR but i've the same problem without a T.

About the lock/sync :
the clock light in the fireface flash and don't stay on. The status on the fireface settings tab is "lock" for the WC input but not "sync".

Thanks for your answer.
Romuald H.

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,547

Re: Fireface and Alesis AI2

Have you set the FF to Autosync? WHich driver version is installed?


Regards
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2009-01-31
  • Posts: 8

Re: Fireface and Alesis AI2

I use v3.028 for the driver and v2.77 for the firmware.
The FF is set on word.

Romuald H.