• Registered: 2007-09-20
  • Posts: 2

Topic: Rotary knob won't switch between Level and Channel

hi there,  The rotary knob on my Fireface 400 is stuck on "Level" and controlling the level of mic input 2.  When i push it in to switch to the channel selector, nothing changes on the display, and the green LED is still lit under "LEV".  I can't seem to switch back and forth between Channel and Level on the rotary at all.  This was not a problem when i first got the Fireface, but only recently (in the last month). Today I downloaded and installed all the latest updates and still no fix... i also have combed through the manual to no avail - i found the part about pressing the knob for a few seconds to switch to "stereo" mode, however when i tried that out there still was no change on my RME.

help asap please!

karen

Fireface 400 on Mac OS X 10.4.10
Dual 2 GHz Power PC G5
4.5 GB RAM
ATI Radeon 9600 Pro
RME Mac OS X Driver version 2.60

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,774

Re: Rotary knob won't switch between Level and Channel

It seems the encoder is simply defective and no longer reacts to being pushed - it recently happened to my FF400, too... sad
The unit needs a (warranty) repair.

Regards,
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2007-09-20
  • Posts: 2

Re: Rotary knob won't switch between Level and Channel

sad that sucks.  thanks for the quick response.

  • Registered: 2009-06-14
  • Posts: 16

Re: Rotary knob won't switch between Level and Channel

I just had the same problem but managed to get it working again on my RME-400.
I pulled the rotary knob toward me and it came off half way then I pushed it back on and now working again....

RME FF400 (v3.047)
Ableton 8.2.5
Windows 7 Ultimate 64 bit SP1, 2.83ghz Quad Core, 6GB ram
  • viper
  • AES/EBU artist
  • Offline
  • Registered: 2008-12-01
  • Posts: 134

Re: Rotary knob won't switch between Level and Channel

Right - just pull the knob out a bit - seems to be a common problem...