• Registered: 2010-12-27
  • Posts: 7

Topic: RME DIGI 96/8 PAD optical in and expansion boards

Hi everyone..
I want to buy a SH RME DIGI 96/8 PAD.
My questions are:
1. does it support 24bit/48KHz optical (spdif not ADAT) in?
2. A friend got some old AIO4 Expansions from a DIGI9652 (he got a digital mixer and use only ADAT in and out) that is willing to gave them to me. Will they work on the RME DIGI 96/8 PAD ?
3. Does it work in XP SP3 or Mac OS 10.5.7 (Power Mac 1.6 PPC)?

Many thanks.

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,774

Re: RME DIGI 96/8 PAD optical in and expansion boards

1. Yes
2. If it's from a 9652, it must be an AEB, not AI4O, and it will work, replacing ADAT I/O (not adding channels).
3. Yes. See http://www.rme-audio.de/en_techinfo_con … osx_compat


Regards
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

  • Registered: 2010-12-27
  • Posts: 7

Re: RME DIGI 96/8 PAD optical in and expansion boards

Many thanks.
I will stay then on PC.

  • Registered: 2010-12-27
  • Posts: 7

Re: RME DIGI 96/8 PAD optical in and expansion boards

I have a question again, I hope it won't be necessary to open another thread:
1. if I use the AEB (replacing the ADAT) , can I use the optical input as SPDIF too ?
And how many inputs I will have in the same time?
Let's say  I want to record on optical spdif and those 4 AEB inputs... will they be shown in Cubase or other ASIO Host ?

Many thanks

  • From: Germany
  • Registered: 2007-04-10
  • Posts: 9,774

Re: RME DIGI 96/8 PAD optical in and expansion boards

Sorry, it's either ADAT/AEB or SPDIF. The card will do a maximum of 8 channels.


Regards
Daniel Fuchs
RME

Regards
Daniel Fuchs
RME

RME Support's Website

6 Reply by cminor (edited by cminor 2011-03-16 08:54:59)

  • Registered: 2010-12-27
  • Posts: 7

Re: RME DIGI 96/8 PAD optical in and expansion boards

OK, but if I need the optical spdif input, it's only a question of "control panel" switch, or should I turn off the PC and disconect the AEB ?
And other thing, can I use the analog factory input (not AEB) and the digital in , as multiple recording sources ? (multitrack)
or I have only one option: analog or digital ?


Thank you.

  • Registered: 2010-12-27
  • Posts: 7

Re: RME DIGI 96/8 PAD optical in and expansion boards

I finally got the DIGI 96 8 PST.
I sounds great , and I use the optical spdif out from my Korg M3 and record thru Optical In of the RME CARD.
I have try to use digi check but as I saw , the only way is MME and the INPUT as source.
Can it be set to output ?
The ASIO input or output is unavaileble, and can not be selected.
Is MME Input the only choice for this card ?

8 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,596

Re: RME DIGI 96/8 PAD optical in and expansion boards

As noted in the online help (F1):

ASIO Input/Output Device
This functionality is not available for the DIGI32 and DIGI96 series.

Hardware Input, Playback und Output Level
This functionality is not available for the DIGI32 and DIGI96 series.

Regards
Matthias Carstens
RME

MC's Website