You installed what driver?

Can you please help with the froozen mixer first.

We are a Band in a Studio, and we are trying to record here , almost around the clock .

We where very tired trying to find out how to get audio signals through to our 4 ADAT interfaces.
ADAT interfaces connected to our new RME ADI 648 MADI.
We started to put the RME HDSPe MADI card on Internal in order to use it as Master Wordclock.
When the HDSPe card finally started to work ,we connected all ADAT interfaces and putted  them in sync.
Thats the state of now, the sync is working through the RME ADI 648 MADI to all ADAT.
Then we made the big mistake, after trying to to route a Wave signal from WM-Player,
that was on Channel 7 and 8 to Channel 1 and  2 .
In order to be abel to route them from Channel  number 1 and have some order when routing them out,
from the HDSPe MADI to RME ADI 648 first.
We was very tired and started to experiment with diminishing the Mixerwindow
instead of trying to find out in the Manuals.
I am sorry thats the way we have done in the past sometimes. ( experiments sometimes work )
The hdspmix then became froozen in that position.
Just a thin part of the mixer is left .
File, Edit, View, Options, Fader Groups and the sign  ? on top.

[img align=L]http://www.froozenfish.com/screenshot.jpg[/img]

This on the computer W7 32

Just whats left of the Mixer to the right.

I want to know also about if we shall use Single speed,

on the Word Clock  Option Out , and what is that.

Aha that was great.
Its now open and fixed .
Thank you very much .
We must make some Dinner here now.
I have a lot of Questions later here soon.
First the already asked question about sync.
I want to know also about if we shall use Single speed,
on the Word Clock  Option Out , and what is that.
Second question : We  wanted it installed in our W7 64 in the first place
and can you fix that also .
It Is freezing in the last moment windows Is about to open

Best Regards

Björn

We where very confused when we tried that and we know from your answere now that its compatible with W7 64 .

The very little we have read in the manual about installation was very much about XP
so after talking to Daniel Fuchs in Telefone we could instal it right so we might have missed something here, in uninstallation in the 64 computer.
We can do that later we need to get help with what we missed in the routing operation ,
that we tried to do that was stopped by this mixersituation.
Just give me an idea where in Windows to make the MADI 1 to 6 appearing under sounds in Control Panel ( Manage devices) ,
because I assume thats why the mediaplayer only can play back from channel  7 and 8  in the Madi-Mixer.
We want route from channel 1 and 2, otherwise we cant find pease here.
Maybe there is more to configurate, but our converter is sending the sync signal through
so it will probarbly send the audio also then.
Its confusing this starting from 7-8 , but the Audio is coming in there though.

Best Regards

We want only MADI from  Channel 1  to  Channel 64
Thanks but the Madi 7-8 is the lowest level that appears there under playback.
I am reading the RME HDSPe MADI manual  now about Playback page 19. ???
Schould I maybe skip Control Panel or disabel something there .???
We always disabel all sounds on our computers for Studio.
I use Wavelab 7 now here to try signals.
Appearing is channel 7 to 64 under Hammerfall MADI in the Control Panel playbac
My question is how to enabel 1 to 6 also.
Maybe that is enabeled from the Mixer hdspmix
Schould I use the direct monitoring option when using Native instruments Kore 2 here.
Sorry I was wrong here the Mixer is now playing back under 1-2 loadspeaker Hammerfall ,
and the the question will be how to make it Madi from 1-2 and where is 3,4,5 and 6

Best Regards

I rebote again to see then

Wavelab 7 is going to Hammerfall Loadspeaker on 1-2 There is no MADI 1-2

I have now disabeled all Playback and Recording Devices in the Control Panel,
and I need to know ,which Playback and Recording  devices I need .
I got only two missing channels  now ,thats 1 and 2.
I am now listening to channel 3-4 out through Coaxial Madi
It seems that processor-power is involved here maybe.
Or is the Computer freezing caused from wrongdoings maybe
I was activating all the auxdevices also and maybe that was wrong.
If its so we need to know because our W7 64 is going to be at least 12GB RAM soon now.
Thats why we wanted to instal there in the first place.
I need to know , we are a music company.
When I choosed  : Show disabeled devices in  the Control panel
A lot of Hammerfall Internal AUX Jack appeared and maybe thats the right ones to use.
The ones called Hammerfall DSP MADI with a small box with missing chanels 1 and 2,
is maybe wrong playback devices for  sending Coaxial or optical signals out to ADI 648.
I got sound there though now.
Also windows was freezing for the second time now, when I was configuring in the
Control Panel playback setup-window  ???
I had to shut down Windows wrongly.
More than five times.
I got sound now.
I hope Windows is not unstable now

Ok thats maybe so but I did not know that the auxchannels was useless until now.
Maybe everything became unstable when we enabeled all auxdevices.
Why is it called loadspeaker 1 and 2, it seems to be just the same signal as when using 3 and 4
By the way , why am I called AD / DA expert.
I am a Feedback expert.
Both analog and now digital with Sonic Core Scope.
I am also a Singer and a Songwriter

Thanks ?
We are now going to send a screenshot soon ,
about  how we want to connect to  Front of the House mixers ,
with both our Madi devices. ( Live set up )
That will be also a question about if you have a better solution.

1. We need to know now first if the Coaxial MADI is the same quality as Optical MADI
2. Is  this set up going to have any problem going from Computer 1 ,
to Front of the House through the MADI-CARD out and signals back to Computer 1,
in order to do mixdown to Stereo , in Computer 1.
3.Most boards seems to have optical MADI, but the Coaxial might be a better way to explaine this for you, because they are totally separated as cabels.
4.We think that in this situation its better to go back to ADI 648 MADI rather than to the HDSPe card.
5.We also want to know if both Coaxial and Optical can be used in the same time goin out FROM HDSPe
to Front of the House , and they other way in and out to the converter ADI 648 using both MADI.
Thats important because we cant test that here and that would be another way of planning this.
That way is not the easiest way in our opinion ,for going back to Computer 1 from Front of the House,
but might be an easier way to mix in both digital and live drums together in our MADI Computer,
before mixing them together with the rest of the Band and the Singing.
6. If we can use them in the same time we also want to know,
if you can help with a solution for the optical Madi-Cabels to make them separated,
or abel to do the same thing. ( going out from the Madi card and back direct into ADI 648 )
Thats a little bit assuming that big boards works better with optical maybe.
7. All this is about finding it wrong to go back to the Madi Computer from Front of the House.
Thats because we intend to do Stereo Mix Down in Sonic Core Computer 1,
and then conversion back to ADAT is sort of a short-cut coming from Front of the House.
8. Before we bought this card we compared it with the more cheap SSL- card ( Extreem Madi ),
with two optical in and out , and we bought HDSPe because  we assumed all this was possible to do.                 

They say its possibel in theire card to go both ways  to f.ex . the Venue  boards and also the other way,
back to f.ex a converter, but we want to know all possibilities.
9. The converter ADI 648 has to work  either  Coaxial or Optical, as far as I can understand,
so then the splitted direction of ours ,is maybe a good or a bad solution ???
Its a question

I dont really follow here.
Did you say there is a chapter in the manual for 648 about going MADI to MADI or was that in the card manual.
Which side is that on, or chapter. I cant find it.
You need to tell me and why do we need one more card for FOH purposes.
I might have misunderstood here. I thought that the converter could route signals MADI to MADI .
As a small band, 32 channel is much and I hink  that Native Instruments Kore 2 can easely Route Channels
to the other 32 Channels thats left  .
But maybe you are refering to all the ADAT Channels used in and out parallel.
We of course want to know about one more card , is that in the same computer or tell me.
The live sequenser we intend to use for live Kore 2  maybe cant work in two soundcards at the same time
Maybe thats possible with MADI then or what.

Best Regards

Bjorn

I dont know if you understood my questions here .
The last questions is about why or if we must have two cards.
We have only one card.
Our computer 1 can have either 32 or 48 channels out.
Computer 2 is having a MADI card.
What computer 3 and 4 is doing is part of the thread.
One more MADI card or continue whatever they want to.
What we schould do in your eyes might not be in our contracts.

You can only choose one input source at any time, either you select Optical MADI in or you select Coax MADI in.

1m MADI cables are available from ALVA, your RME dealer can get these for you.

http://www.alva-audio.de/en_products.ph … eware_madi

Thank you Jeff ,
that you fixed our W7 64 in the bios set up.
To disabel C1E in the Powermanagement in bios.
That was useful information to be abel to do this.

Best Regards

HDSPe MADI is not compatible with that bios configuration,
as far as I can understand.
We checkt that out in our W7 32
and it was already disabled there,
and we did not test if its so.
Thats kind of obvious then.

I forgot to tell you Jeff here fixed the W7 64 configuration i bios for us after tel.call to Amerika.
C1E was supposed to be disabled in bios.