• Registered: 2008-09-12
  • Posts: 45

Topic: Adjusting Analog Inputs 1 and/or 2 makes Main Output reduce volume

When I use the rotary encoder to adjust the input gain of AN1/2 (either as a stereo gang or individually) the Main Control Room output (assigned to AN1/2) reduces by 8dB or by 4dB. It happens after I've pressed Recall, which I've setup to take the Main Output to 0.0dB. It doesn't matter if I increase or decrease the gain, the Main Output drops by 8dB or 4dB. If I alter the gain with the mouse on the TotalMix gain wheel, the problem doesn't arise. At first I thought it was a feature, but the fact that it is a variable drop, and only happens when I use the rotary encoder makes me think it might be a bug. 

Dominic

New Babyface. Firmware v184, Driver 1.62 TotalMix0.962 Mac OS 10.7.2, MacBook Air (2011)

2 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: Adjusting Analog Inputs 1 and/or 2 makes Main Output reduce volume

Thanks, we'll check.

Regards
Matthias Carstens
RME

MC's Website

3 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: Adjusting Analog Inputs 1 and/or 2 makes Main Output reduce volume

Checked and verified. Problem only on Mac. Will be fixed. Thanks for the detailed report.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2008-09-12
  • Posts: 45

Re: Adjusting Analog Inputs 1 and/or 2 makes Main Output reduce volume

Many thanks Matthias.

Dominic

5 Reply by MC

  • MC
  • MC
  • Administrator
  • Offline
  • From: Germany/Thailand
  • Registered: 2007-04-06
  • Posts: 25,599

Re: Adjusting Analog Inputs 1 and/or 2 makes Main Output reduce volume

Firmware 185 should fix this behaviour. I uploaded the release candidate here:

https://archiv.rme-audio.de/download/fu … ac_185.zip

Please try it.

Regards
Matthias Carstens
RME

MC's Website

  • Registered: 2008-09-12
  • Posts: 45

Re: Adjusting Analog Inputs 1 and/or 2 makes Main Output reduce volume

Matthias, that seems to work perfectly in this regard now - I can't get it to misbehave at all. It was quite a repeatable error, so you have fixed it.

Many thanks

Dominic